Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SIGLENT SDS6054L
Summarization of Contents
Copyright Information
Declaration
Legal notice regarding product protection, modifications, and manual usage.
General Safety Summary
Safety Precautions
Essential safety guidelines for operating the oscilloscope to prevent injury and damage.
Operational Safety Guidelines
Additional safety rules related to ventilation, component access, fuses, and covers.
Safety Terms and Symbols
Explanation of hazard terms (DANGER, WARNING, CAUTION) and common safety symbols.
General Care and Cleaning
Instrument Care
Guidelines on proper storage and environmental conditions for the instrument.
Cleaning Procedure
Step-by-step instructions for safely cleaning the oscilloscope and probes.
General Inspection
Shipping Container and Instrument Check
Procedures for inspecting the shipping container, instrument, and accessories upon receipt.
Accessory Verification
Instructions to check if all included accessories are present and undamaged.
Front Panel Overview
Input and Output Connectors
Description of all connectors and terminals located on the front panel.
Control Buttons and Indicators
Explanation of power, status indicators, and reset functions on the front panel.
Handles
Identification of the instrument's carrying handles.
Back Panel Overview
Power and Video/Data Ports
Details on power input, video output, network, and USB connectivity on the back panel.
Signal Outputs and Inputs
Description of auxiliary outputs, external trigger input, and AWG output ports.
Quick Start Setup
Rackmount Flange Kit Installation
Instructions for installing the rackmount flange kit for secure instrument mounting.
Connecting to Power Supply
Guidance on connecting the oscilloscope to the AC power source.
Network and Reference Connections
LAN Connectivity Setup
Steps to connect the instrument to a LAN for remote control and configuration.
Reference Clock Configuration
Instructions for setting up internal or external 10 MHz clock references.
WebServer Access and Instrument Information
Accessing the Web Interface
How to access the oscilloscope's web server using its IP address.
Instrument Details via Web
Viewing instrument model, serial number, and software version through the web interface.
WebServer Control Interface
Main Display and Control Area
Overview of the main display area and mouse interaction within the web interface.
Web Interface Functions
Explains screenshot, waveform saving, file conversion, and firmware update options.
User Interface Overview
UI Components
Overview of major UI elements like menu bar, grid, descriptor boxes, dialog box, and indicators.
Channel Descriptor Box Details
Channel Parameters
Explanation of channel index, coupling, vertical scale, offset, bandwidth, and probe attenuation.
Timebase and Trigger Descriptor Box Details
Timebase Settings
Description of trigger delay, horizontal scale, sample count, and sample rate.
Trigger Parameter Configuration
Details on trigger source, coupling, mode, level, type, and slope.
Dialog Box Interface
Title Bar and Parameter Area
Explanation of the dialog box title bar, parameter setting area, and scrollbar.
Parameter Setting Methods
Switch and List Parameter Input
Methods for setting parameters using switch-like options or selection lists.
Virtual Keypad Input
Using the virtual keypad for numerical input and adjusting parameters.
Basic Operations - System Setup
Channel Management
How to turn channels on/off and configure vertical settings like scale and offset.
Horizontal System Setup
Adjusting timebase, trigger delay, and trigger point positioning.
Acquisition System Configuration
Setting interpolation, acquisition modes, memory management, and sequence modes.
Trigger Indicators and Settings
Trigger Type and Source Selection
Selecting trigger types, sources, slopes, and holdoff parameters.
Trigger Coupling and Noise Rejection
Configuring trigger coupling modes and enabling/disabling noise rejection.
Zone Trigger Configuration
Setting up the Zone Trigger for specific signal conditions.
Math Trace Operations
Creating Math Traces
Steps to create math traces (FFT, etc.) and configure their setup.
Math Trace Parameters
Selecting traces, operators, and sources for math functions.
Measure & Statistics
Accessing Measure Setup
How to open the measure setup dialog box.
Displaying Measurement Data
Understanding the measurement parameters and statistics display area.
Reference Waveform Management
Setting and Displaying References
Procedures for selecting, displaying, and labeling reference waveforms.
Saving Reference Waveforms
Instructions for saving waveforms as reference data.
Memory Trace Operations
Importing and Managing Memory Traces
Importing, configuring, and managing memory traces (M1-M4).
Memory Trace Information
Displaying details like source, parameters, sampling rate, and length.
Save/Recall Functionality
Save and Recall Operations
How to save or recall setups, pictures, waveform data, or reference waveforms.
File Manager Usage
Navigating and managing files using the instrument's file manager.
Calibration Procedures
Self-Calibration Process
Steps to perform self-calibration to ensure measurement accuracy.
Software Option Installation
Installing Optional Software
Guide to installing software options using an option key.
Need help?
Do you have a question about the SDS6054L and is the answer not in the manual?
Questions and answers