Citroen - VDO CONTISYS OBD Instruction Manual

Appendix D: Manual service reset
do include time-based inspection then the time-based inspection status will be
shown.
7. The display will now indicate the remaining time to service. If the remaining time
is displayed with 'rSt' then the service interval can be reset.
8. To reset the time to service limit press button A for 5 seconds. The 'rSt' (or reset)
will flash on the display. If the reset is not required then wait until the 'rSt' (or reset)
has stopped flashing before continuing. To reset press button A again before
'rSt' has flashed 5 times to reset the service time limit. The new time to service
will be displayed for 5 seconds.
9. The 'End SIA' will now be displayed with the remaining time until the next service.

Citroen

Berlingo 1999 - 2002
1. Switch ignition OFF.
2. Press and hold button A.
3. Switch ignition ON.
4. Keep button depressed for 10 seconds.
The display will now read '0' and the spanner icon will extinguish.
A
CON0048
MPH
km/h
87