Table of Contents
Advertisement
Quick Links
REVO nx
REVO nx 130
SOCT Copernicus REVO
SOCT Copernicus
REVO 60
REVO 80
REVO FC
Make sure you read this manual before using
the instrument. Keep this manual in a safe
place so that you can use it in the future.
User Manual
Software Version 10.0
User Manual Rev. A
0197
SOCT User Manual Version 10.0 rev. A
Manufacturer:
OPTOPOL Technology Sp. z o. o.
42-400 Zawiercie
www.optopol.com
info@optopol.com.pl
ul. Żabia 42
POLAND
Advertisement
Table of Contents
Related Manuals for Optopol REVO 80
Summarization of Contents
Description of the Device
Intended Use
Explains the diagnostic use of SOCT for ocular diseases.
Intended User
Lists professionals who can operate the SOCT system.
Places of Use
Specifies the intended locations for device use.
Patient Population
Details the requirements for patients undergoing examination.
Proper Instrument Use
Provides guidelines for correct usage of the instrument.
Contraindication
Lists conditions where SOCT should not be used.
Instruction Manual Availability
Explains how to access the user manual in PDF and paper forms.
Instruction Manual Applicability
States the software version applicability of the document.
Disposal
Provides guidance on disposal at the end of the product life cycle.
Protective Measures for IT Systems
Recommends security measures for IT systems connected to SOCT.
Cybersecurity Functions
Summarizes cybersecurity controls for the SOCT with Windows 10.
Technical Data
Technical Data REVO nx 130 / REVO nx
Details technical specifications for REVO nx devices.
SOCT Copernicus REVO/ SOCT Copernicus / REVO 60/REVO 80
Lists technical data for SOCT Copernicus and REVO models.
Technical Data REVO FC
Provides technical specifications for the REVO FC model.
Device Classification
Classifies the device and its protection against electric shock and water.
Minimum Computer System Requirements
Specifies the hardware and software requirements for capture and review stations.
Capture Station
Details the minimum system requirements for a capture station.
Review Station
Lists the minimum system requirements for a review station.
Safety
Safety Information
Explains safety symbols and general precautions.
Product Label
Describes the marks and indications found on the product label.
Safety Standards
Outlines safety standards, grounding, and electrical connections.
Warnings
Lists hazards that may result in property damage, injury, or death.
Cautions
Details hazards that may result in property damage or injury if not avoided.
General Notes
Provides important notes regarding the use and modification of the system.
Notes on Use
Offers guidance on proper usage before and after examinations.
Before Use
Provides instructions for preparing the device before patient examination.
After Use
Details the steps to follow after completing a patient examination.
Unpacking and Installation
Unpacking
Guides the user through the process of unpacking the device.
Connecting Cables
Explains how to connect the necessary cables for device operation.
Device Connection
Details the electrical connection scheme for the entire system.
Factory Default Calibration and Configuration
Confirms that the system is delivered fully installed and configured.
SOCT Software
Running SOCT Application
Provides instructions on how to launch the SOCT application.
SOCT Application Structure
Describes the user-friendly structure of the SOCT application.
Patient Window
Patient List View
Explains how to view, sort, and customize the patient list.
Registering New Patients
Guides the user through the process of adding new patient records.
Editing Personal Data
Describes how to edit existing patient data.
Unregistering Patients
Explains how to delete patient records and their associated data.
Examination List
Details the information displayed for each examination in the list.
Deleting Exam/s
Instructions on how to delete specific examinations from the list.
Connecting Scans Connected to the Wrong Patient
Explains how to move examinations between incorrect patient associations.
Exporting Examinations
Guides on exporting examination data in raw .opt format.
Export with Anonymization
Details the process of exporting examinations with anonymized data.
Importing Examinations
Explains how to import examinations from .oct and .opt files.
Filter
Describes how to use the filter window to find examinations.
Output
Explains how to output results for single exams, visits, or all patient results.
Work List
Describes the functionality of the Work list tab when configured with external software.
Examination Acquisition Tab
Selection of Scan Pattern Mode
Explains how to select scan patterns like Retina, Disc, Anterior, Central, and Protocol.
Selection of Scanning Program
Guides on selecting scanning programs such as 3D, Radial, B-scan, Cross, and Raster.
OCT Biometry Programs
Details the OCT Biometry programs for AL and ACD measurements.
OCT Topography Programs
Explains OCT Topography programs for corneal curvature analysis.
OCT Angiography Programs*
Covers OCT Angiography programs for 3D scan and visualization of retinal microvasculature.
Fundus Camera Programs*
Lists available Fundus Camera programs for photography.
OCT + Fundus Photography*
Describes combined OCT and Fundus Photography programs.
Selection of Protocol
Explains how to use predefined scanning programs for specific diseases or anatomy.
Device Head Movement Controls
Details how to control the device head movement using mouse or touch screen.
Eye Preview
Describes the eye preview window which displays views from two cameras.
pSLO Live Fundus Preview
Explains the pseudo SLO live image showing enface view of fundus.
IR Preview
Guides on optimizing the image on the IR preview.
Operation on the Fundus Preview
Covers operations like moving scanning area, rotation, and changing scan width.
Moving the Scanning Area
Details how to drag the scanning area to change scanner offset.
Rotation of the Scanning Angle
Explains how to rotate the scan angle for Raster and B-scan programs.
Moving the Internal Fixation Target
Guides on moving the internal fixation target in the pSLO Live fundus preview.
Changing the Scan Width
Describes how to change scan width by dragging the corner of the scanning area.
Changing the Scans Distance
Explains how to change the distance between consecutive tomograms.
Fixation Target Change
Details how to change fixation target size and select external fixation.
Customizing Scan Parameters
Guides on adjusting and saving scan parameters for each pattern and area.
Live OCT Preview
Explains the OCT live preview with tomogram previews for 3D scans and viewports for other scans.
iTRACKING
Describes iTracking technology for compensating eye movements and blinks.
Acceptance Window for a 3D Scan
Explains the acceptance window for 3D scans after motion correction.
Conducting Examination
Preparation for Examination
Covers patient pupil size, refraction verification, and device positioning.
Acquisition Modes Description
Explains Full Auto, Semi Auto, and Manual modes for acquiring examinations.
Full Auto Mode
Details the steps for performing an examination using the Full Auto mode.
Semi Auto Mode
Outlines the procedure for Semi Auto mode, including manual optimization.
Manual Mode
Guides through manual examination mode, including pupil and signal alignment.
Scanning Programs Description
Describes Retina, Central, Disc Area, OCT Angiography, and Fundus Image programs.
Retina Examination
Provides instructions for performing a Retina examination.
Central Examination
Details the steps for conducting a Central examination.
Disc Area Examination
Explains how to perform a Disc Area examination.
OCT Angiography Examination
Covers the procedure for OCT Angiography examination.
OCT Angiography Mosaic Mode
Describes the process for OCT Angiography mosaic mode.
Anterior Measurement
Details procedures for anterior segment measurements like Cornea scan and Angle scan.
Wide Anterior Programs
Covers Wide Anterior programs for REVO FC and REVO & NX.
Wide Anterior Programs for REVO FC
Explains Wide Anterior programs specific to REVO FC models.
Wide Anterior Programs for REVO & NX
Details Wide Anterior programs for REVO & NX models.
Biometry Program
Notes that OCT Biometry is an optional feature.
Topography Program
States that OCT Topography is an optional feature.
Fundus Image REVO FC (REVO FC only)
Covers Fundus Image functionality for REVO FC.
OCT/Fundus Mode
Explains the OCT/Fundus exam mode.
Fundus Mode
Describes the Fundus exam process, similar to posterior segment examination.
Fundus Photo Semi Auto mode
Guides through Fundus Photo Semi Auto mode.
External Fixation
Explains the external fixation method using a second eye to fixate on a target.
Chorioretinal/Vitreoretinal mode
Details C-gate mode settings for enhancing information above or below RPE.
Examination Tips
Provides tips for conducting examinations, especially for nervous patients.
Tips for Automatic Eye Alignment
Offers tips for issues with the START button being inactive.
Tips for Manual Eye Alignment
Provides tips for aligning the pupil position manually.
Auto C-Gate Issues
Addresses issues with Auto C-Gate and optimizing OCT signal.
Focus Alignment
Guides on aligning focus for optimal OCT signal.
Quality IR Preview
Provides tips to avoid poor quality images in IR preview.
Tomogram Alignment
Explains how to align tomograms vertically and horizontally.
Tips to Successfully Scan Difficult Patients
Offers strategies for scanning patients with poor sight or anxiety.
Critera for Exam Acceptance
Provides criteria for evaluating the suitability of captured OCT images.
Evaluation of OCT Fundus Reconstruction for Posterior 3D Exams.
Lists criteria for assessing OCT Fundus reconstruction quality.
Evaluation of OCT Tomograms for Posterior and Anterior Scans
Outlines criteria for evaluating OCT tomograms for posterior and anterior scans.
Result Review
Type of View Mode
Explains different analysis views like Single, Both Eyes, Comparison, and Progression.
[Single] Tab Screen
Shows analysis results for a single eye.
[Both Eyes] Tab Screen
Compares examinations of both eyes from the same date.
[Comparison] Tab Screen
Compares two examinations of one eye from different dates.
[Progression] Tab Screen
Compares six examinations over time for eyes on the same side.
Lock Function
Enables simultaneous manipulation of tomograms in Both Eyes, Comparison, and Progression tabs.
Types of Analysis
Lists available types of analysis, including Single Retina analysis.
Single Retina Analysis
Shows macula images and retinal thickness analysis results.
AI DeNoise
Filters tomograms for noise to improve image quality.
3D Tab
Explains the availability and usage of AI DeNoise in the 3D tab.
Posterior Analysis
Retina Thickness Analysis
Analyzes retinal thickness and includes requirements for perimeter tests.
Single Tab
Presents single eye retina analysis with charts and maps.
Tomogram Window
Describes how to navigate and adjust tomograms in the window.
Retina Signification
Explains fundus reconstruction image creation and overlay options.
Sectors Grid
Corresponds sector graph to the Retina thickness map, showing thickness per sector.
Information Table
Provides average thickness, volume, and average retina thickness data.
Retina Thickness Graph
Shows normative margins and horizontal position of pointer on tomogram.
Macula Normative Distribution:
Details normative distribution of macula thickness and color coding.
Retina Thickness Map
Explains how to scroll and measure thickness at specific points on the map.
Quality Index
Defines Quality Index as a measure of image intensity and signal coverage.
Retina Deviation Map
Shows percentage loss of retinal thickness from the normative database.
Ganglion View
Analyzes Ganglion Cell layer using RNFL+GCL+IPL and GCL+IPL.
Retina View
Displays retinal thickness map and other maps for Both Eyes tab.
Ganglion View
Provides Ganglion Cell Analysis for Retina 3D scans.
S – I – Asymmetry Map
Compares grid cell thickness within the same eye across the anatomic axis.
R - L – Asymmetry Map
Compares cell thickness between eyes, highlighting thinner cells.
Tomogram
Describes how to change displayed tomogram and zoom level.
Fundus View
Presents results with a fundus photo for examinations.
Comparison
Used for observing follow-up changes and correlating examinations.
Progression
Allows viewing differences in plots over time.
Optic Nerve Head Analysis
Analyzes NFL thickness and optic nerve head shape, compatible with Disc 3D scan.
[Both]
Default view for Disc 3D scan showing optic nerve head, RNFL, and TSNIT region analysis.
NFL Significance Map
Shows singular points by comparing RNFL thickness with normative database.
Fundus Photo
Displays imported or linked fundus photos.
ONH Table
Displays selected ONH parameters for Right and Left eyes.
Tomogram Preview
Shows OCT image with marked ILM and NFL layers.
Exam Selector
Allows changing the displayed exam if multiple exams exist for the same date.
NFL Thickness Map
Shows NFL layer thickness on scanned area with rings around the disc.
NFL Symmetry Profile
Displays NFL thickness at TSNIT region for both eyes, with ring thickness and diameter changes.
NFL Sector
Divides measurement circle into sectors and shows NFL thickness from TSNIT.
NFL Parameters Table
Summarizes measurement values related to RNFL thickness at TSNIT region.
[Single] 3D
View for Disc 3D scan, showing Fundus reconstruction, ONH data, and RNFL thickness.
[Progression]
Displays up to six scans chronologically to track RNFL and ONH changes.
Advanced View – Retina and Optic Nerve Head Analysis
Exam Selector
Allows changing the displayed exam if multiple exams exist for the same date.
Thickness Map
Describes overlaying maps like NFL+GCL+IPL thickness on fundus reconstruction.
Deviation Map
Explains overlaying maps like NFL+GCL+IPL significance and deviation.
NFL Thickness
Details overlaying NFL thickness and significance maps.
Structure & Function – Combined OCT and VF Report
Combines Visual Field data with OCT data for a comprehensive report.
Relationships between VF and RNFL/Ganglion Maps
Explains the relationship between VF and RNFL/Ganglion maps.
Requirements that must be met for loading perimeter tests in the SOCT application
Lists requirements for loading perimeter tests from PTS application.
Structure & Function – VF Results Layer in Combined view
Allows overlaying OCT Structure & Function maps with Visual Field results.
Structure & Function – VF Locations Layer
Displays Visual Field points' positions on Retina and Disc maps.
Central Examination
Provides display options for Central examination results.
Central 3D Examination.
Describes 3D visualization of the central exam.
3D Visualization
Manipulation of the 3D Cube
Explains how to rotate, slice, move, resize, and reset the 3D cube.
Selection of Displayed Layers
Describes how to show or hide selected layers in the 3D tomogram image.
Operation Panel
Details options for changing overlay items, shifting masks, and tuning views.
Mask Tab
Allows changing overlay items like enface image, thickness map, and surface layers.
Shifting Mask Tab
Enables shifting specific layers and changing brightness/contrast in Solid view.
Tuning Tab
Allows shifting layers and adjusting brightness/contrast/opacity in Volume view.
Display Tab
Covers options for aligning B-scans, displaying thicknesses, color, and flattening.
[Solid] View
Shows retina and choroid layers as non-transparent images.
[Volume view]
Displays retina and choroid layers as semi-transparent images.
Anterior Segment Analysis
Anterior Radial
Performs corneal thickness analysis on anterior segment images.
[Single] Tab Screen
Shows analysis results for one eye, including eye preview, info table, and thickness map.
[Both Eyes] Tab Screen
Compares analysis results of both eyes from the same scan mode and date.
[Comparison] Tab Screen
Compares two examinations of one eye from different dates.
[Progression] Tab Screen
Shows analysis results comparing six examinations over time.
Edit Anterior Surface
Allows manual correction of corneal surface boundary lines.
AOD Measurement
Tool to evaluate angle opening, measuring AOD and TISA.
Angle Measurement Tool
Enables angle measurement in degrees by setting apex and arms.
Caliper Tool
Used to measure lengths of structures within the anterior chamber.
Tomogram Review Analysis
Shows tomogram image and defined thickness of specified parts.
Full Screen Window
Fundus Reconstruction, Eye Preview or pSLO
Allows toggling between fundus reconstruction, eye preview, pSLO, or fundus photo.
Imaging Tools
Includes tools for changing color and tomogram proportions.
Measurement Tools and Annotations
Enables using measurement tools on fundus reconstruction and tomograms.
Brightness and Contrast Adjustment
Allows adjustment of brightness and contrast using sliders.
Full Screen Mode Exit
Exits full screen mode and returns to exam analysis.
Tomogram Window Manipulation
Covers display and actions menu for tomogram preview, including auto fit.
Edition of Recognized Layers
Allows manual correction of incorrectly recognized layers.
Manual Disc Contour Edition
Enables manual editing of the BM membrane to define disc shape.
Redraw the Disc Contour
Provides methods to redraw the disc contour position.
Print
Posterior Segment Examination Reports/Outputs
Describes printing reports for posterior segment examinations.
Retina 3D
Covers printing reports for Retina 3D examinations.
Disc 3D
Details printing reports for Disc 3D examinations.
Optic Nerve Head Analysis Reports
Explains printing reports for Optic Nerve Head analysis.
Topography Examination Reports
Covers printing reports for Topography examinations.
Fundus Examination Reports
Describes printing reports for Fundus examinations.
Multi B-scan Report
Manually Select Tomograms
Guides on manually selecting tomograms for multi B-scan reports.
Multi B-scan Report for Both and Comparison View
Explains multi B-scan reports for Both Eyes and Comparison views.
Output
Selecting Fundus Photo
Explains how to import and display fundus images.
Adding Fundus Photo to the Examination
Guides on adding fundus photos to examinations.
Fundus Image Registration Correction
Details how to correct the position of imported fundus images.
Linking a Fundus Photo to an Examination.
Explains how to link a single fundus photo to multiple OCT exams.
Examinations Correlation
OCT-OCT Registration
Describes automatic correlation of examinations based on blood vessel shape.
Automatic Correlation
Explains the automatic correlation process and its status indicators.
Manual Registration
Guides on manually correlating examinations by placing point markers.
Fundus Correlation
Covers automatic and manual correlation of fundus photographs with OCT examinations.
Automatic Correlation
Details the automatic correlation process for fundus photos.
Manual Correlation
Provides steps for manually correlating images if automatic correlation fails.
Moving the Overlaid OCT Image
Explains how to drag and rotate the overlaid OCT image.
Closing Fundus and OCT Correlation Window
Describes how to exit the correlation window and save or discard changes.
Extracting Tomograms from a 3D Exam
Explains how to display follow-up tomograms tied to a reference tomogram for comparison.
Angiography OCT
Retina OCT-A
Covers Retina OCT Angiography, including acquisition and module details.
[Single] View – Standard
Presents the standard view for Angiography, showing retina layers depths and OCT enface image.
[Single] View - Detailed
Provides a detailed view for large objects and quantification of results.
Angio OCT Analysis.
Details Angio OCT analysis, including angiogram object and decorrelation values.
Angiogram Object
Explains the angiogram object, its layers, and how to manipulate them.
Quantification Tools: FAZ, VFA, NFA
Covers tools for quantifying Foveal Avascular Zone, Vascular Flow Area, and Non-Flow Area.
FAZ Tool
Focuses on the Foveal Avascular Zone tool for Angio Retina scans.
Foveal Avascular Zone – Semi Auto
Guides through Semi Auto mode for FAZ area detection.
Foveal Avascular Zone – Manual
Explains how to manually create polygon selections for FAZ area.
VFA Tool
Covers Vascular Flow Area measurement using circle or manual pointer tools.
NFA Tool
Details Non-Flow Area measurement for OCT Angio examination.
Quantification Maps [Density and Skeleton]
Provides quantification of vasculature in sectors and heat map.
Angio OCT Analysis Table
[Single] View
Presents Angio OCT analysis table for single view.
[Both] View.
Compares analysis of both eyes for Angio Retina examinations.
[Comparison] View
Compares two examinations of one eye from different dates for Angio Retina.
[Progression] View
Shows analysis results comparing four examinations over time for Angio Retina.
Motion Correction
Motion Correction in 3D Examinations
Explains motion correction for 3D examinations.
Disc OCT-A
[Single] View.
Standard and Detailed views for single Disc Angio.
Standard
Standard view for Angiogram window for Optic Nerve Head.
Detailed
Detailed view for large objects and quantification of results for Disc Angio.
[Both] View
Compares analysis of both eyes for Disc Angio examinations.
Angio Disc Comparison View
Compares two examinations of one eye for Disc Angio.
[Progression] View
Shows analysis results comparing four examinations over time for Disc Angio.
Mosaic
Correlation Status
Informs about the method of superimposition for mosaic composition.
Select Screen
Allows changing, removing, or adding exams for mosaic composition.
Operation on the Mosaic
Covers operations on the whole mosaic and single exams.
Operation on the Whole Mosaic
Explains zoom, move, brightness, contrast, and transparency adjustments for the mosaic.
Operation on a Single Exam
Details how to modify the position of superimpose images for a single exam.
Biometry OCT
Biometry Acquisition Mode
Guides through the process of acquiring biometry data.
Full Auto Mode
Details steps for Full Auto biometry acquisition.
Semi Auto Mode
Explains Semi Auto mode for optimizing signal in challenging cases.
Acceptance Screen
Covers the acceptance screen after biometry examination for verification.
White to White
Describes measurement of distance from limbus to limbus (WTW) and pupil diameter (P).
Result Review
Recommends reviewing all series of measurements for validity.
Single View
Shows biometric results for each series, standard deviation, and average value.
Both View
Compares analysis of both eyes in the same scan mode and date.
Full Screen
Allows manual editing of obtained values using tomogram image and signal graph.
IOL Calculation Tab
Performing IOL Calculation
Guides through calculating IOL power using patient data and formulas.
Marking Implemented Lenses
Explains how to mark lenses for IOL calculation.
IOL Editor
Window for importing, exporting, and editing IOL data.
Importing IOL Data
Details how to import IOL data from various formats.
Exporting IOL Data
Covers exporting the full database or single lens data.
Adding Lenses Manually
Guides on adding new lenses manually to the editor.
Deleting Lenses Manually
Explains how to delete single lenses or all lenses by a manufacturer.
Viewing the List of Lenses
Describes how to unfold and view available lenses.
Editing IOL Data
Allows user to optimize or personalize IOL data.
Adding Additional Power Ranges and Increments
Explains how to create additional power ranges and increments.
Topography OCT
Topography - Safety Notes
Provides safety notes for using the topography module.
Topography Acquisition Mode
Details the acquisition modes for topography scans.
Full Auto Mode
Steps for performing topography acquisition in Full Auto mode.
Semi Auto Mode
Guides through Semi Auto mode for optimizing signal.
Acceptance Screen
Explains the acceptance screen after topography examination.
Total Quality Factor
Summarizes factors determining measurement trust.
Result Review
Provides an overview display of anterior eye segment measurements.
[Single] View
Shows evaluation representations for a single view.
[Both] View
Compares examinations of both eyes in the same scan mode and date.
[Comparison] View
Compares two examinations of one eye from different dates.
[Progression] View
Compares six examinations over time.
Analysis
Covers Central Keratometry, Keratometry (Meridian), and Keratometry (SemiMeridian).
Central Keratometry – SimK
Displays Simulated Keratometry values from central area based on Axial map.
Keratometry (Meridian)
Calculates Astigmatism based on mean diameter in each zone.
Keratometry (SemiMeridian)
Calculates irregular Astigmatism based on mean radius in each zone.
Keratoconus Screening
Classifies keratoconus occurrence using KPI and other indices.
KPI Result
Provides KPI results to distinguish clinical keratoconus.
Pachymetry
Displays a summary of pachymetry data.
Map Types
Explains different map types like Axial, Tangential, and Refractive Power maps.
Color Scale - Standards
Describes how to change scale type, step, and units for maps.
Calibration
Calibration Procedure Preparation
Guides on preparing and installing the calibration tool.
Intitial Topography Calibration Procedure
Details the procedure for initial topography calibration.
Standard Calibration
Explains standard calibration when it's not required or when it is.
Calibration Process
Outlines the steps for the calibration process.
Axial Length (Biometry) Calibration
Ensures high precision of measurements for the Biometry module.
Biometry Calibration with the IOL Calculation Tab Unactivated
Guides through initial biometry calibration when IOL Calculation tab is unactivated.
Biometry Calibration with the IOL Calculation Tab Activated
Details biometry calibration when IOL Calculation tab is activated.
Calibration Process
Describes starting calibration from Biometry or Topography Acquire window.
Entering Biometry Calibration Parameters
Guides on entering calibration parameters provided with the tool.
Common Calibration
Allows calibration of Biometry, Topography, and WTW simultaneously.
Setup Window
General
Allows setting clinic details, language, and software skin.
Database
Covers database handling, networking parameters, and connection.
Storage
Allows locating the database in various folders and adding storage space.
Users Accounts
Manages SOCT software users, including adding, removing, and editing accounts.
Creating User Accounts
Guides through creating new user accounts with login, password, and privileges.
LDAP Settings
Explains LDAP for central account management and user control.
Preferences
Allows customization of device and software settings.
CMDL Interface
Details using Command Line Interface for data exchange with external systems.
Devices Setup
Covers device configuration tabs, including Protocols.
Protocols Tab
Guides on creating, editing, and deleting sets of examinations in protocols.
Creating New Protocol
Explains how to create a new protocol by adding scan programs.
Editing a Protocol
Describes how to edit protocols, add/delete scan programs, and change order.
Parameters Tab
Covers changing parameters like default eye, working position, and load program.
Voice Messages.
Allows customization of voice guide support or disabling it.
Results Settings.
Guides on changing results display settings for review and analysis tabs.
Anonymization
Configures settings for anonymizing personal information during data output.
Visual Field
Covers configuration of PTS database for Visual Field data transfer.
Input Settings Window
Details input settings for patient ID, suffix, prefix, and disease list.
Edit Disease List Window
Allows editing the disease list for examination data output.
Output Settings
Describes how to create, modify, and remove output sets.
Creating an Output Set
Guides on creating output sets for DICOM or different file types.
Graphic File Standard
Mentions that outputted data can be viewed in standard graphic files.
DICOM C-Storage Output Set.
Details configuration for DICOM C-storage output.
Backup
Covers database and examination backup options.
Recovery
Provides options for data recovery from internal and external storage.
DICOM
Explains DICOM interface modules for result storage and modality work list.
System Settings
Covers AE Title, Station Name, Location, and Institution Name settings.
MWL Settings
Details communication with Modality Work List for patient data and orders.
C-Storage
Explains how examination results can be sent to DICOM network or file.
Info Tab
Displays information about the SOCT software and copyright.
Patient Record Change Traceability and LogReader Software
Explains how to track patient record changes and use LogReader software.
Maintenance and Cleaning Procedure
Routine Cleaning
Covers cleaning of the device casing, applied parts, and lens.
Cleaning of the Device Casing and Equipment of the ME System (PC, Monitor LCD, Printer, Keyboard and Mouse PC)
Guides on cleaning device casing and connected computer peripherals.
Cleaning of the Applied Parts (Forehead and Chinrest Support)
Details disinfection of applied parts after each examination.
Cleaning of the Lens
Explains how to clean the lens sporadically using optical cleaners.
Dust Prevention
Advises to use a cloth dust cover when the SOCT is not in use.
Software Maintenance Activities
Outlines activities for keeping software in good condition, including updates and antivirus.
Hard Disk Defragmentation
Explains the necessity and process of defragmenting the OCT PC hard disk.
Ordering Consumables
Lists consumables and spare parts with article names and codes.
Fuse
Addresses blown fuses as a possible reason for device malfunction.
Blown Fuses Exchange
Provides instructions on how to safely exchange blown fuses.
Network Configuration
Network Connection Configuration
Describes networking configuration for SOCT software.
SOCT Network
Explains locating data on network locations and sharing the database.
SOCT Software - Viewing Station Configuration
Guides on configuring SOCT software for viewing stations.
Remote Connection
PTS Application for Structure & Function Report
Details configuring the PTS application for remote communication.
Warranty and Service
Service Life
States the product's service life and required inspections.
About Repairs
Provides information on contacting distributors for repairs and necessary details.
Utilization
Maximum Lifetime of Device
Indicates the maximum lifetime of the device since manufacture.
Product Compliance
Radio Interference
Discusses compliance with FCC rules for digital devices and radio frequency energy.
Canadian Regulations
Mentions compliance with Canadian regulations for radio noise emissions.
EMC Information
Provides guidance and declaration on electromagnetic emissions and immunity.
Need help?
Do you have a question about the REVO 80 and is the answer not in the manual?
Questions and answers