Related Manuals for Austroflamm 97x
Summarization of Contents
General Information
Copyright Notice
Details copyright and reservation of rights for the manual's content.
Regulations to Observe
Lists relevant standards and regulations for installation and operation.
Purpose of Operating Manual
Storing the Manual
Guidance on where to keep the operating manual for future reference.
Manual Structure
Explanation of the manual's organization and table of contents location.
Representations Used
Explanation of symbols and notations used within the manual.
Version Control
Information on how manual versions are updated and where to find the latest.
Abbreviations Used
List of abbreviations and their corresponding meanings used in the manual.
Safety Instructions
Importance of Safety Instructions
Highlights the significance of safety information for safe operation.
General Safety Guidelines
Provides essential safety rules for operation, handling, and environment.
Safety Distances
Specifies required clearances from the fireplace insert to prevent hazards.
Danger Types and Protective Equipment
Identifies potential dangers and required personal protective equipment (PPE).
Product Overview
Intended Use
Defines the proper application and use of the fireplace insert.
Identifying the Tools
Overview of key dimensions and identification of product components.
Nameplate Positioning
Shows the location of the appliance's identification and rating plates.
Technical Data
Technical Data by EU Regulation
Technical specifications according to EU Directive 2015/1185 and Regulation 2015/1186.
General Specifications
Provides a summary of key technical specifications across all models.
Chimney/Flue Dimensioning Data
Data required for calculating and dimensioning the chimney and flue system.
Transport and Storage
Transportation Procedures
Instructions for safe handling and movement of the fireplace insert.
Storage Guidelines
Recommendations for proper storage conditions to maintain product integrity.
Installation Location Requirements
Room Installation Requirements
Specifies suitable and unsuitable locations for fireplace insert installation.
Installing the Fireplace Insert
Guidance on the physical installation process of the fireplace insert.
Combustion Air Supply
Details on ensuring adequate combustion air for safe and efficient operation.
Combustion Air Duct
Requirements for the construction and installation of air ducts.
Chimney Requirements
Specifications and checks necessary for the chimney system.
Multiple Occupancy Chimneys
Guidelines for connecting to shared chimney systems.
Flue Pipe Connecting Pieces
Information on selecting and installing flue pipe connection components.
Fuel Material and Quantity
Fuel Material Guidelines
Information on approved fuels, wood types, and properties for combustion.
Fuel Quantity Limits
Specifies the maximum amount of fuel that can be used for safe operation.
Installation Instructions
Set-up Near Protected Wall
Instructions for positioning the insert near walls requiring protection.
Convection Air Cladding
Guidance on installing convection air cladding and related regulations.
Convection Space
Requirements for maintaining adequate convection space around the insert.
Convection Conduction
Specifications for air outlet and inlet cross-sections and clearances.
Fireplace System without Air Grille
Description of operation for hypocaust systems without air grilles.
Protecting the Installation Base
Methods for protecting the base from heat and fire hazards.
Expansion Joints
Requirements for expansion joints between the insert and cladding.
Cladding Materials
Information on suitable non-flammable materials for cladding.
Fireplace Aprons
Guidelines for the installation and placement of fireplace aprons.
Ornamental Beam Installation
Permissible placement and clearance requirements for ornamental beams.
Ceiling Above Fireplace Insert
Protection requirements for the ceiling above the fireplace insert.
Floor in Front of Fireplace Insert
Specifications for the non-flammable area in front of the insert.
Fire Protection Measures
General fire protection requirements for areas around the insert.
Heat Insulation Layers and Materials
Details on approved insulation materials and their application.
Electric Cable Runs
Prohibitions regarding electric cable placement in the installation area.
Balanced Flue-Tested Inserts
Specific requirements for flue pipe and combustion air connections.
Connection to Ceramic Flues
Stove with Ceramic Flue
Guidance for connecting the appliance to a ceramic flue system.
Connection to Heat Recovery Surfaces
Instructions for connecting heat recovery surfaces to the appliance.
Installation Process
Risks and Dangers
Identifies potential hazards and necessary safety equipment during installation.
Execution Steps
Detailed steps for the physical installation of the fireplace insert.
Dismantling the Keramott
Procedure for removing the Keramott firebox lining components.
Installing Firebox Lining (Keramott)
Step-by-step guide for installing the Keramott firebox lining.
Installing Deflector Plates
Instructions for fitting the deflector plates within the firebox.
Removing the Door
Procedure for safely removing the appliance door.
Converting Door to Type BA2
Steps for converting the door from self-closing to non-self-closing.
Converting Combustion Air Collar
Guidance on adapting the combustion air collar for different models.
Mounting Large Top Storage Box
Instructions for attaching the optional large top storage box.
Mounting Top Storage Bricks
Procedure for installing the top storage bricks.
Installing the HMS
Steps for installing the Heat Memory System (HMS) components.
Mounting the Designer Frame
Instructions for attaching the decorative designer frame.
Mounting Convection Cladding
Steps for installing the convection cladding system.
Assembling InsertControl
Guide for assembling the InsertControl unit and its components.
InsertControl Automatic Combustion Control
Explanation of how the automatic combustion control system operates.
Settings and Adjustments
Adjusting the Door
Procedure for adjusting the fireplace insert door for proper alignment.
Adjusting the Smoke Collector
Instructions for positioning and securing the smoke collector.
Commissioning
Initial Commissioning Steps
Procedures and precautions for the initial start-up of the fireplace.
Operation Guide
Appliance Controls Overview
Identification and function of the appliance's control elements.
Before Heating Up
Pre-heating checks and preparation steps for optimal function.
Fuel Information
Details on approved fuels, clean combustion, and explosive substances.
Firing Procedure
Step-by-step guide for safely starting and managing the fire.
Heating Process
Guidance on managing heat output and air controls during operation.
Putting on Wood
Instructions for safely adding more fuel to the firebox.
Heating in Transition Period
Advice for operation during periods of high external temperatures.
Heating with Ceramic Flue/Heat Recovery
Specific operating instructions for systems with ceramic flues or heat recovery.
Operation Mode
Emphasizes operating the insert with doors closed for optimal efficiency.
Cleaning and Maintenance
Cleaning Fireplace Insert and Flues
Procedures for cleaning the insert and fuel gas flues annually.
Removing Ashes
Instructions for regular removal of ashes from the firebox.
General Cleaning
Guidelines for cleaning the glass, seals, and other parts.
Cleaning Door Window
Specific instructions for cleaning the glass on the appliance door.
Troubleshooting and Help
Sooty Glass Window Issues
Common causes and solutions for a sooty glass window.
Small Chimney Draft Issues
Causes and solutions for insufficient chimney draft.
Odour and Smoke Problems
Addressing external smoke and unusual odors from the insert.
Flue Gas Escape Issues
Troubleshooting flue gas escape during stoking or heating.
Weak or Extinguished Fire
Diagnosing and resolving issues with a weak or dying fire.
Insufficient Room Warmth
Troubleshooting why the room is not warming up adequately.
Fast or Uncontrolled Fire
Addressing issues with a fire burning too quickly or uncontrollably.
Sooty Ceramic Panes
Causes and solutions for ceramic panes becoming sooty quickly.
Firebox Lining Information
Details about the Keramott firebox lining and its characteristics.
Chimney Fire Procedures
Steps to take in the event of a chimney fire.
Fault Identification
Information required by the dealer when reporting faults.
General 'What If' Scenarios
Common operational questions and troubleshooting scenarios.
Dismantling Instructions
Execution of Dismantling
Procedure for safely dismantling components like revision and weight cartridge.
Need help?
Do you have a question about the 97x and is the answer not in the manual?
Questions and answers