Display > Data; Display > Active Alarms - NorthStar EXPLORER AP380 Installation And Operation Manual

4-4 Display > Data
The data display shows one large data cell, two smaller data cells and a data history graph. Each is
these items can be configured to display a range of data types. The graph is useful for analysing the
performance of the AP380.
Display area
Big data cell
1
Small data cells
2
History graph
3
Time base
4
Options menu:
Data setup Enters the data set-up mode. Use the Control Dial to highlight a data cell,
press to display a list of data types that can be displayed in that cell.
Time base - Selects the time base of the history graph. Select 2 min, 4 min, 10 min,
20 min or 1 hour.
4-5 Display > Active alarms
Shows a list of the currently active alarms (see section 3-12-2).
Function
Customizable data cell. Default: Rudder angle.
Customizable data cells. Default: Voltage, AP380 Status.
This graph plots data over a period of time. There are two graph series that can
be configured, red and green. Default: Rudder angle, Course error.
The time base of the graph can be set from 2 minutes to 1 hour. This is the
amount of time it takes for new data to scroll from the right hand side to
the left hand side.
Northstar Explorer AP380 System Installation and Operation Manual
1
2
3
4
Data display
55