Important - NorthStar EXPLORER AP380 Installation And Operation Manual

Important

It is the owner's sole responsibility to install and use the instrument and transducer/s in a manner
that will not cause accidents, personal injury or property damage. The user of this product is solely
responsible for observing safe boating practices.
The choice, location, and installation of all components in any AP380 system is critical. If installation is
not correct, the unit can not perform at its designed potential. If in doubt, consult your Northstar dealer.
Ensure that any holes that cut are in a safe position and will not weaken the boat's structure. If in doubt,
consult a qualified boat builder.
Using the Explorer AP380 system :
The Explorer AP380 system is intended as an aid to save a helmsman from having to steer for long
periods of time, not as the main means of steering the boat.
The Explorer AP380 system is not intended for use in extreme weather, in adverse conditions or in
water near other boats, dangerous waters or land.
The Explorer AP380 system can not control the boat better than a helmsman. In adverse conditions
steer the boat manually.
Never leave the helm unattended. Keep a watch at all times. The helmsman should always monitor
the course of the boat and the Explorer AP380 system and be ready to resume steering the boat
manually.
The performance of the Explorer AP380 system can be affected by the failure of a part,
environmental conditions, improper installation and use.
Northstar Explorer AP380 System Installation and Operation Manual
5