3-3 Turning the Explorer AP380 off
When in STBY mode:
•
Press and hold
and start a 3 second count-down. The unit
will turn off when the counter reaches 0.
•
Releasing
during this time will resume
normal operation.
•
Any settings you have made are retained by
the unit.
When in AUTO mode:
•
Press and hold
will remind you to enter STBY mode before
the unit can be turned off. Press
the pop-up.
3-4 Backlight
Briefly press
. The Backlight pop-up will
appear.
Repeating this action will toggle from day to
night mode.
Use the Control Dial to increase or decrease the
display and keypad backlighting.
•
The Explorer AP380 has a choice of white
background 'Day' and black background
'Night' backlighting modes. Either mode can
be selected using the Control Dial.
•
The Backlight pop-up may also be selected:
Menu > Setup > System > Backlight menu.
•
Backlighting on all other Northstar
instruments that are connected on the same
NavBus backlighting channel will also change.
42
. A pop-up box will appear
. A warning pop-up box
to close
Northstar Explorer AP380 System Installation and Operation Manual
3-5 Engaging AP380
Select AUTO mode by pressing
is now steering the boat based on the selected
steering mode.
3-6 Disengaging AP380
Select STBY mode by pressing
is not steering the boat – the helmsman must
steer the boat using the manual helm.
3-7 Setting the steering mode
For a power boat:
For a boat without GPS, or for a boat with GPS
but you do not want to navigate to a waypoint,
choose Compass mode. The AP380 steers the
boat at a set compass heading.
•
Select Compass mode by pressing
choose Compass and press
To use the AP380 with a GPS to navigate to a
waypoint or along a route, choose GPS mode.
The AP380 steers the boat using navigation data
from the GPS.
•
Select GPS mode by pressing
GPS and press
For a sailing boat:
To steer to a set compass heading, choose
Compass mode.
•
Select Compass mode by pressing
choose Compass and press
To navigate to a waypoint or along a route,
choose GPS mode.
•
Select GPS mode by pressing
GPS and press
To sail, tack and gybe at a set angle to the wind,
choose Wind mode.
•
Select Wind mode by pressing
Wind and press
. The AP380
. The AP380
,
.
, choose
.
,
.
, choose
.
, choose
.