NorthStar EXPLORER AP380 Installation And Operation Manual page 47

3-10-2 Turns in compass mode
To change course by 90˚
• press select 90˚ turn then press
,
• press select 90˚ turn then press
,
To change course by 180˚
• press , select 180˚ turn then press
• press select 180˚ turn then press
,
Press to initiate a 90 or
180 turn to port or starboard.
When auto-tacking (in Compass Mode), the
course to steer changes by the tack angle.
The AP380 does not use data from any wind
instrument. It is possible for the boat to gybe
or to end in irons (head to wind).
Note: To tack to a fixed wind angle, use the
AP380 in Wind mode (see section 7-3). To view
or change the tack angle or the tack delay, go to
tack mode, tack angle or tack delay in the Options
menu (see section 6-3). Gybe angle is not used in
Compass mode.
to turn to port by 90˚
to turn to starboard by 90˚
to turn to port by 180˚
Northstar Explorer AP380 System Installation and Operation Manual
to turn to starboard by 180˚
Press
direction
or to select turn
47