Related Manuals for SIGLENT SSG5085A
Summarization of Contents
General Safety Summary
Use Proper AC Power Line
Use only the designed and authorized power cord for the instrument.
Ground the Instrument
Ensure correct grounding via power line to prevent electric shock.
Safety Precautions - Component and Hazard Safety
Avoid Exposed Circuit or Components
Do not touch exposed contacts or components when the power is on.
Do Not Operate Without Covers
Do not operate the instrument with covers or panels removed.
Safety Terms and Symbols
Safety Terms Definition
Defines DANGER, WARNING, CAUTION terms used in the manual.
Working Environment Specifications
Rated Voltage and Frequency
Details the acceptable input voltage and frequency ranges for the instrument.
Temperature and Humidity Ranges
Outlines operating and non-operation temperature and humidity limits.
Cleaning Procedures
Instrument Exterior Cleaning
Instructions for cleaning the instrument exterior using a damp cloth, avoiding moisture.
SSG5000A Overview
Key Features and Benefits
Highlights key specifications like frequency range, resolution, output, accuracy, and modulation.
Chapter 1 Quick Start
Appearance Size Details
Provides physical dimensions and views of the RF signal generator.
Preparing for Use
Adjust the Supporting Legs
Guidance on adjusting the instrument's supporting legs for benchtop operation.
Connect to AC Power Supply
Instructions for connecting the signal generator to an AC power source.
The Front Panel
Front Panel Function Keys
Description and function of the front panel control keys.
Front Panel Key Backlight
Explains the meaning of backlight colors for Power Switch and MOD ON/OFF keys.
Digital Keyboard Operation
Details the layout and functionality of the front panel digital keypad for input.
Front Panel Connectors
LF (low frequency) Output
Describes the BNC connector for low frequency signal output.
RF (Radio frequency) Output Terminal
Describes the N-type connector for radio frequency signal output.
Rear Panel Connectors
AC Power Input Terminal
Specifies the AC power input terminal and voltage range.
LAN Interface Configuration
Details the LAN interface for network connectivity and remote control.
USB Host and Device Interfaces
Describes USB Host port for external devices and Device interface for PC connection.
Rear Panel Interfaces
EXT MOD INPUT and 10MHz Ports
Describes EXT MOD INPUT BNC and 10MHz IN/OUT connectors for sync.
Pulse In/Out and Signal/Trigger Ports
Explains Pulse In/Out, SIGNAL VALID and TRIG IN/OUT connectors.
User Interface Overview
Prompt Status Bar Explanation
Explains status bar indicators for LOCAL/REMOTE, EXT REF, MOD, RF, SWEEP, etc.
RF Frequency and Level Display Areas
Describes the display areas for RF frequency and level settings.
Touch Screen Operation
Touch Screen Gesture Controls
Details how to interact with the touch screen using gestures like click, slide, and zoom.
Parameter Setting Methods
Inputting Parameters
Explains how to set parameters using digital keyboard, touch screen, or knob.
Help Information Access
Using the Built-in Help System
Describes how to access the built-in help system for functions and menus.
Chapter 2 Front Panel Operation
Frequency Setting Procedures
How to set the RF output frequency and related parameters like offset.
Frequency Offset Setting
Setting Frequency Offset
How to set frequency offset for external mixers or circuit shifts.
Phase Offset Setting
Configuring Phase Offset
How to set phase offset for multiple RF signals to achieve synchronous output.
Level Setting
RF Signal Level Setting
How to set the RF output level using keypad or touch screen.
Level Offset Configuration
How to set level offset to account for attenuation or amplification.
ALC State Control
Setting Automatic Level Control
How to set the ALC state (Off, On, Auto) for output stabilization.
Flatness Correction Function
Flatness Settings and Editing
Details on editing flatness correction lists, adding, deleting, and recalling entries.
Sweep Setting
Sweep State Configuration
How to enable/disable sweep and select sweep types (Freq, Level, Freq & Level).
Sweep Pause and Continue Functionality
Functionality to pause and resume sweep operations.
Step and List Sweep Configuration
Step Sweep Configuration
How to configure step sweep parameters like start/stop frequency, level, dwell time.
List Sweep Configuration
How to set up list sweep by editing frequency, level, and time points.
Sweep Direction and Mode
Sweep Direction Control
How to set the sweep direction (Up or Down) for frequency and level sweeps.
Sweep Mode Selection
How to choose between Continuous and Single sweep modes.
Sweep Trigger Mode
Setting Sweep Trigger Mode
How to set the trigger mode (Auto, Key, Bus, External) for sweep operations.
Point Trigger Mode
Configuring Point Trigger Mode
How to set the point trigger mode for sweeping individual points.
Trigger Slope Selection
Selecting Trigger Edge
How to select the trigger edge (Positive or Negative) for external triggers.
Analog Modulation
Amplitude Modulation (AM) Setup
How to configure Amplitude Modulation parameters.
AM Source and Shape Settings
Selecting AM Source and Waveform
How to select AM modulation source (Int, Ext, Int+Ext) and waveform shape.
AM Rate and Depth Settings
Setting AM Modulation Rate and Depth
How to set the modulation rate and depth for Amplitude Modulation.
Frequency Modulation (FM) Setup
FM Source Selection
How to select FM modulation source (Int1, Int2, Ext, etc.).
FM Shape, Rate, and Deviation
Setting FM Waveform, Rate, and Deviation
How to set FM waveform shape, rate, and deviation.
FM Sensitivity, Phase, and Proportion
Configuring FM Sensitivity, Phase, and Proportion
How to set FM sensitivity, initial phase, and amplitude proportion.
Phase Modulation (PM) Setup
PM Source Selection
How to select PM modulation source (Int, Ext, Int+Ext).
PM Shape, Rate, and Deviation
Setting PM Waveform, Rate, and Deviation
How to set PM waveform shape, rate, and deviation.
Pulse Modulation (PULSE) Setup
Pulse State, Output, and Source
How to set Pulse State, Pulse Output, and select Pulse Source.
Pulse Polarity, Mode, Period, and Width
How to set pulse polarity, mode, period, and width.
Double Pulse Delay and Trigger Out
Configuring Double Pulse Delay and Trigger Out
How to set double pulse delay and configure trigger output.
Pulse Trigger Configuration
Setting Pulse Trigger Mode
How to set the trigger mode for pulse modulation.
Trigger Slope, Polarity, and Pulse Train
Configuring Trigger Slope, Polarity, and Pulse Train
How to set trigger slope, polarity, and configure pulse train sequences.
LF Setting
LF Source Configuration
How to configure the internal low-frequency signal generator source.
LF Sweep Configuration
Setting LF Sweep Parameters
How to set up LF sweep parameters like state, frequency, and direction.
Utility Functions
System Settings
How to configure language, screen saver, power-on behavior, and preset types.
Reset and Beeper Settings
Factory Reset and Beeper Configuration
How to perform factory reset, clear files, and configure beeper settings.
10M Adjustment and Time Setting
Adjusting 10MHz Reference and Setting Time
How to adjust the 10MHz reference and set the instrument time.
System Information and Interface Settings
Viewing System Info and Configuring Network
How to view system info and configure LAN, DHCP, IP, Subnet Mask, and Gateway.
Self Test Procedures
Performing Diagnostic Tests
How to perform LCD, Key, LED, Board, and Touch Screen tests.
Shutdown, Preset, and Update
Instrument Power-off, Reset, and Software Update
Procedures for shutting down, resetting, and updating the instrument software.
Option Installation and Help Access
Installing Options and Accessing Help
How to install options/licenses and access the help system.
Contact Information and File Management
Contacting Support and Managing Files
How to contact support and manage files (view, create, rename, delete, copy, paste, recall, save).
Power Sensor Integration
Power Meter Settings
How to access and configure power sensor settings.
Power Sensor Measurement and Control
Details on sensor measurement, level control, and statistics.
Power Sensor Level Offset and Averaging
Setting Level Offset and Averaging Mode
How to set level offset and averaging mode for power sensor measurements.
Level Control Operation
Controlling Output Level
Detailed explanation of the Level Control function and its state.
Target, Limit, and Catch Level
Setting Power Measurement Levels
How to set target, limit, and catch levels for power sensor measurements.
Shortcut Keys
Preset Functionality
How to recall preset settings and restore the signal generator to a specified status.
Home, Trigger, and ESC/Close Keys
Explains the functionality of Home, Trigger, and ESC/Close buttons.
MOD ON/OFF and RF ON/OFF Keys
Explains the function of MOD ON/OFF and RF ON/OFF buttons for modulation and output.
Chapter 3 Application Examples
Output RF Signal Example
Step-by-step guide to output an RF signal with specific frequency and amplitude.
Correcting 10MHz Reference Example
Guide on correcting the internal 10MHz reference signal using adjustment function.
Correcting Line Loss Example
How to correct line loss using the Flatness function and a power meter.
Output a Pulse Train Example
Step-by-step configuration to output a user-defined pulse train sequence.
Chapter 4 Programming Overview
Remote Operation Setup
How to set up remote operation using USB, LAN, and GPIB interfaces.
Building Communications
Building Communications with VISA
Steps to install and use NI-VISA for instrument communication.
Building Communications with Sockets/Telnet
How to establish communication using Sockets/Telnet over LAN.
Remote Control Capabilities
User-Defined Programming and SCPI Commands
Using SCPI commands for programming and controlling the generator via NI MAX.
Web Control Capabilities
How to control the signal generator remotely via a web browser.
Chapter 5 Troubleshooting Guide
General Inspection Steps
Initial checks for shipping container, instrument, and accessories.
Troubleshooting Common Issues
Solutions for screen display, key response, and waveform output problems.
Troubleshooting Sweep and USB Issues
Solutions for abnormal sweeps, USB device recognition, and measurement accuracy.
Chapter 6 Service and Support
Service Summary and Warranty Information
Details SIGLENT's warranty policy and service arrangements.
Contact Information for Support
Provides contact details for SIGLENT offices worldwide.
Need help?
Do you have a question about the SSG5085A and is the answer not in the manual?
Questions and answers