Related Manuals for Fukuda Denshi DynaScope DS-7200 System
Summarization of Contents
Safety Precautions
Labels Attached to the Unit
Make sure to read the warning labels attached to the unit and comply with these requirements while operating the unit.
Medical Electrical Equipment & Telemetry Safety
Safety guidelines for medical electrical equipment and telemetry operations.
Maintenance & Pacemaker Safety
Precautions for safe maintenance and operation with pacemaker patients.
Environmental & System Safety
Safety measures for explosive environments, electrosurgery, MRI, and system connections.
Network, Ventilator, SpO2, NIBP, Battery, and EMC Safety
Safety guidelines for network, ventilator, SpO2, NIBP, battery, and EMC considerations.
1. General Description
Names of Parts and Their Functions
Identifies and describes the various parts of the DS-7200 Main Unit and Option Units.
2. Basic Operation
Before Use
Covers essential steps and checks before operating the DS-7200 system for monitoring.
Preparation for Monitoring
Details the procedures for powering on the device and connecting it to a power source.
To Admit a Patient
Guides on the process of admitting a new patient into the system for monitoring.
Ventilator Alarm Input
Details the connection and setup for receiving ventilator alarm signals.
4. Monitoring Setup
Display Configuration
Allows customization of the display layout and appearance for optimal viewing.
Description of Alarm Message and Alarm Sound
Details the various alarm messages and sounds generated by the system.
Key Setup For Easier Use
Covers setting up user keys and menu shortcuts for efficient operation.
Recording Setup
Details how to set up and manage different types of recording.
5. Admit / Discharge of a Patient
Admitting a Patient
Details the process of entering patient demographic and identification information.
Discharging a Patient
Explains how to properly discharge a patient from the system.
6. Parameter Setup
Setting the Monitoring Condition
Covers initial setup for monitoring parameters like ECG, Respiration, and Blood Pressure.
ECG
Details ECG setup options including lead selection, filtering, and alarm settings.
SpO2 (NellcorĀ® Model: DS-7210)
Covers setup for SpO2 monitoring using Nellcor sensors.
NIBP
Details setup for non-invasive blood pressure monitoring, including auto mode and alarms.
7. Function
Arrhythmia Analysis Definition, etc.
Defines arrhythmias and explains QRS classification and alarm settings.
Graphic Trend Display/Print
Explains how to display and print graphic trends of patient data.
ST Display
Details the ST segment display and associated alarm setup.
8. System Configuration
Alarm Mode Setup
Details how to program and configure different alarm modes.
Monitor Setup
Covers various settings for the monitor, including message icons, passwords, and network configuration.
9. Installation
Precautions for Installing the Equipment
Provides essential precautions to be taken before and during equipment installation.
Power Source and Ground Connection
Explains how to connect the device to a power source and ensure proper grounding.
Wireless Network Construction
Explains how to set up a wireless network connection using telemetry.
Wired Network Construction
Details the procedure for setting up a wired network connection (DS-LANII/III).
Ventilator
Details the connection and setup procedures for ventilators.
Oximeter
Explains how to connect and configure oximeter devices.
TCP/IP Network Connection
Covers the process of connecting the DS-7200 system to a TCP/IP network.
10. Maintenance
Handling After Use / Display Panel
Provides guidelines for handling the device and its display panel after use.
Maintenance Check
Details daily and periodic checks required to ensure device functionality and safety.
Troubleshooting
Provides solutions for common issues encountered with the DS-7200 system.
12. Accessories
Accessories
Lists the standard accessories included with the DS-7200 system.
Optional Accessories
Lists optional accessories available for purchase to enhance system functionality.
11. Technical Information
Specification / Performance
Provides detailed specifications and performance characteristics of the DS-7200 system and its components.
External Connection Pin Assignments
Details the pin assignments for various external connectors on the DS-7200 system.
Setup Item Default and Backup
Lists setup items, their default settings, and backup status for system configuration.
Need help?
Do you have a question about the DynaScope DS-7200 System and is the answer not in the manual?
Questions and answers