Brief Overview Of Security Functions - Fujitsu LIFEBOOK U939X Operating Manual

Security functions

Brief overview of security functions

Detailed information about the security equipment of your device can be found in
the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD or on
the Internet at "http://www.fujitsu.com/fts/support/index.html".
Security functions
Security Lock
Fingerprint sensor
(configuration dependent)
Palm sensor (configuration
dependent)
BIOS password protection
Boot from removable media
Owner Information
SmartCard reader
(configuration dependent)
Trusted Platform Module
60
Type of protection
Mechanical
Biometric
Biometric
Password protection for BIOS
Setup, operating system and
hard disk with supervisor and
user password. The passwords
consist of a maximum of eight
alphanumeric characters.
Prevents unauthorised booting
of an operating system from
external media (e.g. USB stick,
USB CD-ROM drive etc.).
Overlay service desk or owner
information during the boot
process.
PIN and SmartCard protection
for operating system
Identification and authentication
of the notebook
Preparation
Fit and lock the Kensington
Lock Cable (accessory).
Install the supplied fingerprint
software.
Installing the supplied software
Specify at least one supervisor
password in the BIOS Setup
and activate the password
protection for the operating
system and hard disk as
desired.
In the BIOS Setup, go to the
Security menu and edit the
option Boot from Removable
Media.
In the BIOS Setup, go to the
Security menu and edit the
option Owner Information.
To use the SmartCard reader
functions, install the supplied
(or other suitable) software.
Define a supervisor password
in the BIOS Setup and enable
the TPM (Security Chip).
Fujitsu