Is the drive enclosure Fault/Service Required LED amber?
Answer
Possible Reasons
No
System functioning properly.
Yes
One of the following errors
(blinking)
occurred:
•
•
•
Yes
A fault occurred.
If installing an I/O module
FRU, the module has not gone
online and likely failed its
self-test.
Hardware-controlled
power-up error
Cache flush error
Cache self-refresh error
Actions
No action required.
•
Check the event log for specific information regarding
the fault.
•
Isolate the fault.
•
Contact an authorized service provider for assistance.
•
Replace if necessary.
•
Check the event log for specific information regarding
the fault.
•
Isolate the fault.
•
Contact an authorized service provider for assistance.
•
Replace if necessary.
•
If installing an I/O module FRU, try removing and
reinstalling the new I/O module, and check the event
log for errors.
HP StorageWorks 2000i G2 Modular Smart Array User Guide
51