Darning Stitch - Bernina Bernette 25 Instruction Manual

Darning Stitch

D
Stop
a a
b
Start Start
Stop
b
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN
Basic Sewing Procedures
50: Simple darning stitch in thin and medium
fabrics
51: Reinforced darning stitch in heavy fabrics
Select stitch pattern 50 or 51 to get the
darning stitch.
Change the presser foot to the buttonhole foot.
Baste the upper fabric and the under fabric
together.
Select the needle position. Lower the
presser foot over the center of the tear.
Pull the button holder to rear.
Set the button guide plate on buttonhole foot
to the desired length.
The size of one darn cycle is variable.
However, the maximum stitch length is
2.6cm (1 inch) and the maximum stitch width
is 7mm (9/32 inch).
a. The length of sewing.
b. The width of sewing.
45