Buttonhole Stitching - Bernina Bernette 25 Instruction Manual

Buttonhole Stitching

D
2.5~7.0 0.3~1.0
3.0~7.0 0.3~1.0
2.5~5.5 0.3~1.0
5.5~7.0 0.3~1.0
3.0~7.0 1.0~2.0
Starting
point
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN
Basic Sewing Procedures
10: For thin or medium fabrics
52: For horizontal holes on blouses or shirts
made from thin or medium fabrics
53: For thin or medium fabrics
54: For horizontal holes on blouses or shirts
made from thin or medium fabrics
55: For horizontal buttonholes on thick
fabrics
56: For thin or medium fabric
57: For suits or overcoats
58: For thick coats
59: For jeans or stretch fabrics with a coarse
weave
Please Note:
Before sewing a buttonhole on your project,
practice on a scrap piece of the same type
of fabrics.
Mark the positions of the buttonhole on the
fabric. The maximum buttonhole length is
3cm (1 3/16 inch). (Total of diameter +
thickness of button.)
Attach the buttonhole foot, then pull out the
button holder plate and insert the button.
The size of the buttonhole is determined by
the button inserted in the button plate.
The thread should be passed through the
hole in the presser foot, then be placed
under the foot.
Select the buttonhole stitch.
Adjust the stitch width and the stitch length to
the desired width and density.
41