Bernina Bernette 25 Instruction Manual page 12

Note:
When the bobbin winder
machine will display the symbol "
6. Hold the thread tail securely in one hand.
7. Press on the foot control or the Start/Stop button to start
winding the bobbin.
8. After the bobbin has wound a few turns stop the machine
and cut the thread near the hole of the bobbin. Continue
filling the bobbin until it is full.
The motor stops automatically when the bobbin is full. Stop
the machine. Push the bobbin winder spindle to left.
9. Cut the thread and then remove the bobbin.
Note:
When the bobbin winder
winding position", the machine will not sew and the handwheel
will not turn. To start sewing, push the bobbin winder spindle to
the left "sewing position".
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN
spindle is pushed to the right, The
"
spindle is placed on the right, "bobbin
Machine Setup 11