Button Sewing - Bernina Bernette 25 Instruction Manual

40 Basic Sewing Procedures

Button Sewing

a
b
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN
Change the presser foot to the button
sewing foot.
Move the drop feed control to "
the feed dogs.
Position the work under the foot. Place the
button in the desired position, lower the foot.
Select zig zag pattern. Adjust the stitch width to
"2.5-4.5" according to the distance between the
two holes of the button.
Turn the handwheel to check that the needle
goes cleanly into the left and right holes of the
button.
Before sewing, press the Auto-lock button to
sew reinforcement stitches automatically at the
beginning and at the end of the stitch.
If a shank is required, place a darning needle
on top of the button and sew.
For buttons with 4 holes, sew through the
front two holes first, push work forward and
then sew through the back two holes.
" to lower