Table of Contents
Advertisement
70
Special Functions
1st memory position
2nd memory position
2nd memory position
2nd memory position
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN
Replace a stored stitch
Press the memory button to enter the
memory (
review/edit)
mode
shows the stitch of the 1st memory
Use selector wheel to select the stitch that
you want to replace
.
Press the p
attern group
stitch number starts flashing.
Use selector wheel to select desired stitch.
(E.g.47)
Please Note:
Before enter the stitch:
- The parameters of the selected stitch, such
as stitch length and stitch width, mirroring
and twin needle, may be adjusted by
pressing the corresponding button.
- The stitch can be test sewn by pressing the
start/stop button or the foot controller.
Note, that the machine will automatically
stop sewing at the end of the stitch.
Press Set/disp
button
the memory
review/edit
Press the memory button to leave the
memory mode
and
return to the normal mode
, the screen
position
.
selection button
,
the
to
store
and
return to
mode.
.
Hide quick links:
Advertisement
Table of Contents
