Merlin MR655MYQ Installation And Operating Instructions Manual

Merlin MR655MYQ Installation And Operating Instructions Manual

Garage roller door opener

Advertisement

gomerlin.com.au
gomerlin.co.nz
SilentDrive Essential
Garage Roller Door Opener
Installation and Operating Instructions
Owners Copy: Please keep these instructions for future reference
DO NOT PROCEED WITH THE INSTALLATION UNTIL READING THE
MR655MYQ
This manual contains IMPORTANT SAFETY information
INSTRUCTIONS THOROUGHLY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MR655MYQ and is the answer not in the manual?

Questions and answers

Summarization of Contents

IMPORTANT SAFETY INSTRUCTIONS
Safety Alert Symbols
Explains the meaning of safety alert symbols used in the manual.
General Safety Guidelines
Provides crucial safety guidelines for installation and operation.
Maintenance and Testing
Emphasizes regular checks like safety reverse system testing.
User Restrictions
Advises on usage by children or persons with reduced capabilities.
Operational Warnings
Lists specific warnings for automatic drive and damp environments.
CONTROL PANEL
Terminal Block Functionality
Describes the terminal block for external accessories and its connections.
Control Buttons and LEDs
Explains the function of UP, DN, P, S buttons and LEDs.
Courtesy Light
Describes the courtesy light feature.
INSTALLATION PROCEDURE
Preparation for Installation
Steps before physically installing the opener.
Installing the Opener
The main steps for mounting the opener.
Connecting Power
Steps for connecting the opener to power.
SETTING THE LIMITS FOR RIGHT OR LEFT HAND OPERATION AND FORCE
Setting Hand Operation
Configuring the opener for left or right-hand installation.
Setting Door Limits
Adjusting the open and closed positions.
Setting Force Automatically
Automatic adjustment of door force.
Setting Force Manually
Manual adjustment of door force.
TIMER TO CLOSE FEATURE (TTC)
TTC Activation and Deactivation
Procedures for enabling and disabling the auto-close feature.
PROGRAM TRANSMITTERS TO THE OPENER LIGHT
Transmitter Programming and Erasing
Methods for linking and clearing transmitter codes for the opener light.
VENTILATION MODE - PARTIAL OPENING FEATURE
Activating Ventilation Mode
How to set a partial opening position.
Deactivating Partial Opening
How to disable the partial opening feature.
OPENER OPERATION AND FEATURES
Operation Modes and Controls
Details activation, obstruction behaviour, and manual opening.
Maintenance and Settings
Covers limit/force checks, transmitter management, and monthly tasks.
TROUBLESHOOTING
Opener & Transmitter Issues
Addresses non-operation, range problems, and unintended activation.
Door Movement Problems
Covers reversals, strains, and binding issues.
Control & Indicator Faults
Deals with wired control failures and LED error codes.
Power Outage Operation
Guidance for operation during power outages.
DIAGNOSTIC CHART
IR Beams and Sensor Faults
Diagnosing issues with obstruction sensors and alignment.
Door Control & Motor Faults
Troubleshooting wired controls, motor strain, and binding.
Electronic & Communication Faults
Addresses PCB failures and transmitter communication issues.
No RPM Pulses
Troubleshooting motor movement issues.
CHAMBERLAIN LIMITED WARRANTY
Warranty Coverage and Exclusions
What is and is not covered by the warranty.
Warranty Conditions and Claims
Requirements for validity and how to make a claim.
Liability and Legal Notices
Legal disclaimers and consumer rights.

Table of Contents

Save PDF