Update, --Name <Name>, --Role <Source | Target>, --Peer <Ip Address | Hostname - Dell DR4000 Reference Manual

NOTE:
Make sure that the data container you intend to replicate already exists. If if
does not, the following error message displays: Error: Container <container_name>
does not exist.
administrator@mydr4000 > replication --add --name
dataStorage4 --role source --peer 10.250.194.5
Enter password for administrator@10.250.194.5:
Replication entry created successfully.
Replication Container
Replication Role
Replication Target System IP
Replication Target Container
Replication Enabled
To verify that you have successfully added a replication link to a DR4000
system (or to view the current status of existing containers), enter the
example command string at the system prompt:
administrator@mydr4000 > replication --show
Container Name
backup
swsys-59_replicate
dataStorage1
dataStorage2
dataStorage3
dataStorage4
--update, --name <name>, --role <source | target>, --peer <ip address |
hostname>
To update an existing replication link to a container in a DR4000 system,
enter the example command string at the system prompt:
administrator@mydr4000 > replication --update --name
dataStorage4 --role source --peer 10.250.194.5
If you attempt to update a container that already has replication enabled, this
displays the following message:
Replication on dataStorage4 is enabled and cannot be
updated, please stop it first.
: dataStorage4
: Source
: 10.250.194.5
: dataStorage4
: Yes
Replication Role
Source
Source
Source
Source
Source
Source
Managing DR4000 System Storage Operations
91