Network
This set of CLI commands lets you perform the following network-related
tasks:
•
Display information about a DR4000 system
•
Manage an existing networking configuration
•
Restart networking
•
Configure the DR4000 to use DHCP or static IP addressing
•
Configure domain name servers (DNS)
•
Update the bonding mode or maximum transmission unit (MTU)
•
Look up the IP address or hostname for a specific destination
•
Start a packet trace route for a specific network host
•
Ping a destination host
•
Perform basic troubleshooting
Command Usage
•
network --show
•
network --restart
•
network --setdhcp
•
network --setstatic_ip [options]
•
network --setdns [options]
•
network --setbonding [options]
•
network --nslookup [options]
•
network --traceroute [options]
•
network --ping [options]
•
network --troubleshoot [options]
•
network --help
24
Managing the DR4000 System