User
This set of CLI commands allow you to manage the service and root accounts
by enabling or disabling these accounts, and display the list of current active
users on a DR4000 system.
Command Usage
•
user --show
•
user --enable [options]
•
user --disable [options]
•
user --help
--show
To display the current set of active users on a DR4000 system, enter the
example command string at the system prompt:
administrator@mydr4000 > user --show
User Name
=========
administrator
root
--enable, --user <service | root>
To enable the service or root user account on a DR4000 system, enter the
example command string at the system prompt:
administrator@mydr4000 > user --enable --user root
"root" user enabled
NOTE:
After using Restore Manager, only the administrator account remains
enabled (all other system accounts are disabled). For example, if you had previously
enabled a root user before using Restore Manager, you must re-enable the account
by using this CLI command string.
60
Managing the DR4000 System
Terminal
Login Time
========
===========
pts/0
Sep 29 16:24
(acme-eng.storage.local)
pts/1
Sep 29 15:05
(acme-sales.storage.local)