Dell DR4000 Reference Manual page 66
Command line reference guide
Hide thumbs
Also See for DR4000:
- Owner's manual (156 pages) ,
- Glossary (151 pages) ,
- Administrator's manual (144 pages)
Table of Contents
Advertisement
Adding NTP server ... Done
Starting NTP service ... Done
NTP server 2.centos.pool.ntp.org added
To verify the NTP server was added, enter the following command string at
the system prompt:
administrator@mydr4000 > system --show --ntp
NTP Service is
Server 1
Server 2
Server 3
To delete an NTP server, enter the following command string at the system
prompt:
administrator@mydr4000 > system --setntp --delete
2.centos.pool.ntp.org
Stopping NTP service ... Done
Removing NTP server ... Done
Starting NTP service ... Done
NTP server 2.centos.pool.ntp.org deleted
To disable and enable the NTP service, enter the following command string at
the system prompt:
administrator@mydr4000 > system --setntp --disable
Shutting down ntpd: [
administrator@mydr4000 > system --setntp --enable
ntpd: Synchronizing with time server: [
Starting ntpd:
To synchronize a DR4000 system with the NTP server, enter the following
command string at the system prompt:
administrator@mydr4000 > system --setntp --adjust_time
Time difference less than 2 seconds. Not adjusting with
server 0.centos.pool.ntp.org
Time difference less than 2 seconds. Not adjusting with
server 1.centos.pool.ntp.org
Time difference less than 2 seconds. Not adjusting with
server 2.centos.pool.ntp.org
56
Managing the DR4000 System
: UP
: 0.centos.pool.ntp.org
: 1.centos.pool.ntp.org
: 2.centos.pool.ntp.org
OK
]
[
OK
]
OK
]
Advertisement
Table of Contents
