--Resync, --Name <Name>, --Role <Source | Target; Replication --Help - Dell DR4000 Reference Manual

To configure replication limits for a DR4000 system, enter the example
command string at the system prompt:
administrator@mydr4000 > replication --limit --speed 10gbps
--target swsys-60
Successfully updated replication limit for swsys-60 to 10
Gbps.
Changing traffic control policies ... done.
--resync, --name <name>, --role <source | target>
To resynchronize the replication process between a source and target, enter
the example command string at the system prompt:
administrator@mydr4000 > replication --resync
--name dataStorage3 --role source
Successfully initiated replication resync on container
dataStorage3.

replication --help

To display the replication-related options that you can use as a reference when
using the CLI, enter the following command string at the system prompt:
administrator@mydr4000 > replication --help
Usage:
replication
replication
94
Managing DR4000 System Storage Operations
--show [--name <name>]
[--role <source | target>]
[--verbose]
[--limits]
--add
--name <name>
--role <source | target>
--peer <ip address | hostname>
[--peer_name <name>]
[--username <user name>]