Related Manuals for Rosslare AC-225-BE
Summarization of Contents
Introduction
AxTraxNG Software
Describes the AxTraxNG software system for managing access control.
AxTraxNG Client-Server Structure
Explains the client-server architecture of the AxTraxNG system.
AxTraxNG Configurable Links
Details the system's configurable links for automating operations and integration.
Technical Specifications
AC-225x-DIN Technical Specs
Technical specifications for the AC-225x-DIN model.
AC-225x-B in ME-1015 Specs
Specifications for the AC-225x-B when installed within the ME-1015 enclosure.
AC-225x-B Panel Setup
Inputs Wiring: Non-Supervised
Detailed wiring instructions for non-supervised inputs on the AC-225x-B panel.
Inputs Wiring: Supervised
Instructions for wiring supervised inputs, including resistor placement.
Output Wiring
Illustrates wiring for electrical release mechanisms and relay contacts.
Power Supply
Details power supply connections and recommendations for backup battery.
Panel Wiring Communications
Provides a detailed view of the panel's wiring for communication.
Reader Wiring
Guidance on reader wiring and cable length specifications.
MD-IO84B Expansion
Information on the MD-IO84B I/O expansion board and its connection.
MD-D02B Expansion
Details on the MD-D02B reader expansion board and its connection.
Input and Output Connections
Input Types Overview
Describes the four types of inputs: Normally Open, Normally Closed, and supervised variants.
Normally Open Input Connection
Explains the connection and states for Normally Open inputs.
Normally Closed Input Connection
Details the connection and states for Normally Closed inputs.
Supervised NO Single Resistor Input Connection
Wiring for supervised inputs with a single 8.2 kΩ resistor.
Supervised NO Double Resistor Input Connection
Wiring for supervised inputs with 2.2 kΩ and 8.2 kΩ resistors.
Supervised NC Single Resistor Input Connection
Wiring for supervised inputs with a single 2.2 kΩ resistor.
Supervised NC Double Resistor Input Connection
Wiring for supervised inputs with 2.2 kΩ and 8.2 kΩ resistors.
Input Descriptions
Describes specific input functions like REX and Door Monitor.
Request-to-Exit (REX) Button Input
Explains the function and connection of the Request-to-Exit button.
Door Monitor Input
Details the Door Monitor input for door status sensing.
General Purpose Inputs
Information on using general-purpose inputs for various functions.
Outputs
Discusses output types, including door lock outputs.
Card Readers & Keypads
Details connection options for card readers and keypads.
AC-225x-B Hardware Settings
DIP Switch Configuration
Explains how DIP switches control baud rate, panel type, and address.
Access Control Panel Baud Rate
Details the settings for the access control panel's serial port baud rate.
Access Control Panel Type
Explains how DIP switch 3 sets the panel type (readers per door).
Access Control Panel Addressing
Describes how DIP switches set the panel's network address.
Communications Setup
Serial Network Connection
Details serial communication methods (RS-232/RS-485) for connecting to a computer.
RS-232 Connection to Computer
Instructions for establishing an RS-232 connection to the computer.
RS-485 Connection to Computer
Explains how to connect the panel using the RS-485 interface.
Daisy Chaining
Describes how to connect multiple panels in a daisy-chain configuration.
TCP/IP Network Connection
Details TCP/IP network connectivity for AC-225IP models.
LAN and WAN Requirements
Specifies requirements for connecting to LAN and WAN networks.
Need help?
Do you have a question about the AC-225-BE and is the answer not in the manual?
Questions and answers