Displaying Qos Prioritization For A Circuit - Brocade Communications Systems 8 Administrator's Manual

4
Portshow command usage
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
118180 Input Bytes
0 Bps 30s Avg, 4 Bps Lifetime Avg
757 Input Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg

Displaying QoS prioritization for a circuit

The following example shows QoS prioritization for an FCIP circuit on a 7800 switch.
switch:admin> portshow fcipcircuit 20 1 --perf --qos
Circuit ID: 20.1
Circuit Num: 1
Admin Status: Enabled
Oper Status: Up
Remote IP: 104.83.0.141
Local IP: 104.80.0.141
Metric: 0
Min Comm Rt: 150000
Max Comm Rt: 150000
SACK: On
Min Retrans Time: 100
Max Retransmits: 8
Keepalive Timeout: 5000
Path MTU Disc: 0
VLAN ID: 0
L2CoS: F: 0 H: 0 M: 0 L: 0
DSCP: F: 0 H: 0 M: 0 L: 0
Flags: 0x00000000
Flow Ctrl State: Off
Connected Count: 3
Circuit Duration: 7 hours, 57 minutes, 37 seconds
Performance Statistics - Priority: F-Class
81892 Output Bytes
5 Bps 30s Avg, 2 Bps Lifetime Avg
752 Output Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
74200 Input Bytes
0 Bps 30s Avg, 2 Bps Lifetime Avg
683 Input Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
Performance Statistics - Priority: High
0 Output Bytes
0 Bps 30s Avg, 0 Bps Lifetime Avg
0 Output Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
0 Input Bytes
0 Bps 30s Avg, 0 Bps Lifetime Avg
0 Input Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
Performance Statistics - Priority: Medium
5408 Output Bytes
0 Bps 30s Avg, 0 Bps Lifetime Avg
52 Output Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
46572 Input Bytes
0 Bps 30s Avg, 1 Bps Lifetime Avg
88 Fabric OS FCIP Administrator's Guide
53-1001766-01