Brocade Communications Systems 8 Administrator's Manual page 48

2
Configuration steps
TABLE 5
Option
Minimum retransmit
time
failover/standby metric
VLAN Tagging
DSCP Tagging
34
Circuit options
Argument
-m
-x
-v --<vlan_tag>
--l2cos-f-class
--l2cos-high
--l2cos-medium
--l2cos-low
- -dscp-f-class <n>
- -dscp-high <n>
- -dscp-medium <n>
- -dscp-low <n>
Disruptive Description
The minimum retransmit time, in
milliseconds. The range of valid values is
20 through 5,000 ms and the default is
100 ms.
You can configure standby circuits by
assigning a metric. Refer to
failover capabilities"
description of circuit failover and the use
of standby circuits.
Applies a VLAN tag to a circuit and sets a
specific layer two class of service. Refer
to "QOS, DSCP, and VLANs"
for information about VLAN tagging.
Applies a DSCP tag to a circuit. Refer to
"QOS, DSCP, and VLANs"
information about DSCP tagging.
Fabric OS FCIP Administrator's Guide
"FCIP circuit
on page 12 for a
on page 16
on page 16 for
53-1001766-01