Error Operations; About The Error Operations - Panasonic WJND400 - NETWORK DISK RECORDER Operating Instructions Manual

Error operations

About the error operations

Do the following when the error log is displayed. Contact the dealer when an unlisted error occurred.
Error log display
MAIN-d WRITE ERR
(EXTu-d WRITE ERR)
MAIN-d READ ERR
(EXTu-d READ ERR)
MAIN-d HDD SKIP
(EXTu-d HDD SKIP)
MAIN RAID5 1DOWN
(EXTu RAID5 1DOWN)
MAIN RAID5 2DOWN
(EXTu RAID5 2DOWN)
MAIN RAID6 1DOWN
(EXTu RAID6 1DOWN)
MAIN RAID6 2DOWN
(EXTu RAID6 2DOWN)
MAIN RAID6 3DOWN
(EXTu RAID6 3DOWN)
MAIN-d SMART
WARNING
(EXTu-d SMART
WARNING)
MAIN-d HOUR METER
WARNING
(EXTu-d HOUR METER
WARNING)
NORMAL-HDD
CAPACITY
REMAINS **%
EVENT-HDD CAPACITY
REMAINS **%
EVENT-HDD FULL
COPY-HDD CAPACITY
REMAINS **%
COPY-HDD FULL
CAM cc
COMMUNICATION
ERROR
CAM cc
COMMUNICATION
ERROR (AUDIO)
58
LCD
Failed to read or write data to the HDD.
The HDD may have malfunctioned.
MAIN ERR The HDD malfunctioned while in RAID
RAID5 1DOWN mode.
(EXTu ERR
RAID5 1DOWN)
MAIN ERR
RAID5 2DOWN
(EXTu ERR
RAID5 2DOWN)
MAIN ERR
RAID6 1DOWN
(EXTu ERR
RAID6 1DOWN)
MAIN ERR
RAID6 2DOWN
(EXTu ERR
RAID6 2DOWN)
MAIN ERR
RAID6 3DOWN
(EXTu ERR
RAID6 3DOWN)
MAIN-d ERR The HDD malfunctioned and may not
SMART WARNING be usable.
(EXTu-d ERR
SMART WARNING)
MAIN-d ERR The time set on the Hour Meter has
HDD HOUR METER expired. The HDD may be near the end
WARNING of its product life.
(EXTu-d ERR
HDD HOUR METER
WARNING)
AREA ERR When [Disk end mode] is [Stop], HDD
NORMAL HDD **% is full or remaining capacity is low.
AREA ERR
EVENT HDD **%
AREA ERR
EVENT HDD FULL
AREA ERR
COPY HDD **%
AREA ERR
COPY HDD FULL
NW ERR Communication with the network
CAMERA cc ERROR camera is unstable or the network
camera is not connected.
Description of error Remedy
If this error occurs frequently, contact
your dealer to have the HDD replaced.
*1
Contact your dealer. After restoring or
replacing the malfunctioning HDD,
clear the error status.
Contact your dealer to have the HDD
*1
replaced.
Contact your dealer to have the HDD
*1
replaced.
*1
Reset or replace the HDD.
Check the communication status with
the network camera.