Select An Area To Play Back - Panasonic WJND400 - NETWORK DISK RECORDER Operating Instructions Manual

Playback
Note:
• When doing a VMD search in the multiple image screen, the
upper-left image is searched.
• If you do a VMD search during sequence operations, the
sequence operation stops.

Select an area to play back

Playback camera images saved in the Normal recording area, Event
recording area, and Copy area on the HDDs.
1
Click the [Control] button.
2
Click the [Search] button in the [Area select] box.
This will display the [Area select] window.
• The Area select window is not displayed during playback.
3
Select the check box for the area to be played back.
• Normal area/Event area
• Copy area
4
Click the [OK] button.
The selected disk is displayed in the status display area.
5
Click the [HDD] tab.
6
Click the [PLAY] button.
"Playing [Step 1]" is displayed in the status display area and
the recorded images on the selected disk are played back.
• Refer to page 20 for information about operations during
playback.
7
Click the [STOP] button.
Stops playback.
26
• "Playing [Step 1]" disappears from the status display area
and a live image from the camera is displayed in the
Image display.
• If you press the [PLAY] button after stopping playback,
playback resumes from the time and date when playback
was stopped.