[Cam. Select] Button - Panasonic WJND400 - NETWORK DISK RECORDER Operating Instructions Manual

About operating windows
Note:
• The rec event list is displayed when the [Refresh] button is
pressed, or when searching (page 24, page 25) or when
selecting an area (page 26).
• The [All list] button is disabled during playback. Stop playback
and then do the search operation.
• When there are many cameras, the recording start time may
vary for each channel.
12

[Cam. select] button

The following operation panel appears when you click the [Cam.
select] button.
(1)
(2)
Group title
Camera title
(1) [Multiscreen select] box
Displays multiple images from up to 4 cameras at the same
time. Switches between the four screens by each clicking of
the button following the preset camera combination (refer to
the Setup Instructions (PDF file)).
(2) [Sequence] box
Switches the camera images automatically in a preset
sequence. The button indicator lights green during sequence
(refer to the Setup Instructions (PDF file)).
(3) [El-zoom] box
Displays the camera image at the magnification of the button
clicked.
: 1x
: 2x
: 4x
(4) [Cam. select] box
Displays the group titles of the cameras connected to the
recorder when clicking [WJ-ND400]. Refer to the Setup
Instructions (PDF file) for information about group settings.
Displays the cameras the belong to that group when clicking
a group title. Displays the image of camera when clicking a
camera title on 1-screen.
(3)
(4)