Problem
•
Refresh of live images is unstable
•
Browser disconnection occurs
•
Network performance is poor
•
Downloaded image is not displayed
correctly
•
The image is not displayed,
recorded, or played back correctly.
Cannot operate camera
Check item/remedy
If the cameras use different compression formats, the performance may be
poor (image update is unstable).
The settings may exceed the performance limit of network cable or the
recorder's network.
Lower the value/rate related to network performance, such as the live
transmission rate and the recording rate.
The recorder and the HUB network speed may not match (100BASE- TX
Full and 100BASE-TX Half, for example). A HUB may cause variations in
network transmission speeds.
Set the HUB's transmission speed and the recorder's network transmission
speed to the same speed.
Make sure that the number of the camera set in [NW camera] on the setup
menu is correct.
Make sure that the user name and password in [NW camera] on the setup
menu have been input.
Troubleshooting
Page
−
Setup
Instructions
(PDF file)
−
Setup
Instructions
(PDF file)
Setup
Instructions
(PDF file)
63