Automatic Intermittent Panning <Auto Pan - Sanyo VCC-P9574S - 1/4" CCD Pan-Focus PTZ Dome Camera Instruction Manual

Automatic Intermittent Panning <AUTO PAN>
1
Set <POSITION> to "START" and press the SET
button.
·POSITION
PAUSE TIME
SPEED
RUN
·POSITION START
RThe "PAN/TILT" screen appears.
■ Set the starting position for the automatic pan
Tilt
Pan Pan
Tilt
MEMO: Pan, tilt, and zoom settings are performed on the same screen during
remote operation through a hard disk recorder or controller.
Press the SET button to switch over between pan/tilt and zoom
operations.
Wide Tele
RReturns to the "AUTO PAN" screen.
SET
AUTO PAN
R
STARTy
5S
NORM
SET
PAN/TILT
SET
R
SET
ZOOM
R
Automatic Monitoring <AUTO MODE>
2
Set <POSITION> to "END" and press the SET
button.
·POSITION
PAUSE TIME
SPEED
RUN
·POSITION END
RThe "PAN" screen appears.
■ Set the end position for the automatic pan
Pan Pan
RReturns to the "AUTO PAN" screen.
SET
AUTO PAN
R
END y
5S
NORM
SET
PAN
SET
R
32