Setting Camera Address <Address; Setting Alarm Output To Communication Line; Alarm Line Out - Sanyo VCC-P9574S - 1/4" CCD Pan-Focus PTZ Dome Camera Instruction Manual

4
Set <TERMINATE> to "ON" or "OFF".
·TERMINATE
ON : Camera is the cabling termination.
OFF : No termination
5
Select <MENU> – "BACK" and press the SET
button.
RReturns to the "OPTION" screen.
• If you want to finish the settings screen, select "END" and press
the SET button.
Setting Camera Address <ADDRESS>
1
Select <ADDRESS> and specify an address for
the camera (0 - 127).
·ADDRESS
CONTROL SETTING
BAUD RATE 19200
·TERMINATE OFF
OPTION
TITLE OFF
PRIVACY MASK SET y
CONTROL COAX
·ADDRESS 1

ALARM LINE OUT

OFF
Configuring the Communication Settings <OPTION>
Setting Alarm Output to Communication
Line <ALAR LINE OUT>
1
Set <ALARM LINE OUT> to "ON" or "OFF".
·ALARM LINE OUT
ON : Outputs alarm signals to communication line.
OFF : No output
■ Once the settings are complete
Set <MENU> to "END" and press the SET button.
R Closes the settings screen and returns to the normal monitoring
screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.
OPTION
TITLE OFF
PRIVACY MASK SET y
CONTROL COAX
ADDRESS 1
·ALARM LINE OUT OFF
PRESET OFF
MENU BACK
46