Backlight Compensation <Blc - Sanyo VCC-P9574S - 1/4" CCD Pan-Focus PTZ Dome Camera Instruction Manual

Backlight Compensation <BLC>
If the images of subjects are not clear because of backlight, compensate for it by
adjusting conditions or changing the compensation method.
1
Select <BLC> and specify the compensation
method.
SYNC
·BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
·BLC
PRESET
MENU
■ If you want to return to the previous screen
Select <MENU> – "BACK" and press the SET button.
■ If you want to close the settings screen
Set <MENU> to "END" and press the SET button.
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
OFF
BACK
Setting Camera Performance <CAMERA>
■ CENT (Center zone metering)
Compensation is made based on the optical measurement that is
focused on the central area of the screen (the image of subject to
be compensated is located in the center of the screen).
■ MULT1 (Multi-spot metering, Normal mode)
Compensation is made based on the optical measurement and
assessment of the entire screen (the image of subject to be
compensated is not limited to a center of the screen location).
■ MULT2 (Multi-spot metering, High mode)
Compared to MULT1, faster backlight compensation is possible
against a lesser amount of light.
■ OFF
No compensation is performed for backlight.
For accessing the main menu, see pages 7 – 8.
16