Setting The Camera Angle - Canon VB-M700F Operation Manual

A q [Control Assist Display] selection box
VB-M600D VB-M600VE
Select whether to [Enable] or [Disable] operation assist
in the image display area.
A a [Control Button Display] selection box
VB-M600D VB-M600VE
Select whether to [Enable] or [Disable] the [Pan] button
and [Tilt] button in the image display area.
A s [Image Flip] selection box
Select the orientation of the camera image.
If [Enable] is selected, the image will be rotated 180
degrees.
A d [Control Assist Correction]
When the orientation of the camera is moved by hand,
the operation assist display will not correspond with the
actual camera angle. In this case, click [Control Assist
Correction] to confirm the actual camera angle and
automatically correct the display position of operation
assist.
Operation assist correction takes about 1 minute to
complete.
A f [Focus]
You can control the focus.
A g [Exposure Compensation]
You can control the exposure.
3
-6
VB-M600D VB-M600VE
VB-M600D VB-M600VE

Setting the Camera Angle

You can operate pan, tilt, rotation and zoom operations in
VB-M600D/VB-M600VE to set a desired camera angle.
VB-M700F allows zoom operation only.
Set Using the Operation Buttons and Sliders
VB-M600D VB-M600VE
Click each of the [Pan], [Tilt], [Rotation] buttons to set the
camera angle. Camera angle changes in orientation if the
button is held down, and stops when the button is
released.
Pan (horizontal movement) operation
Tilt (vertical movement) operation
Rotation (angled movement) operation
To set rotation using the [Rotation] slider, drag the slider
and release the mouse button when the subject in the
image is shown at a level angle.