Flow Of Intelligent Function Setting - Canon VB-M700F Operation Manual

• [Detection Settings of the Same Type]
Show the detection areas or detection results for the
same type of detection settings as those selected in
the detection setting list.
• [Do not display]
No detection areas or detection results are shown.
8 [Restart intelligent function]
If the background image has changed while you were
specifying settings or detection results are not as set,
etc., click this button to restart the intelligent function.
Important
It takes tens of seconds for the intelligent function to restart. No
detection is performed while restarting.
9 [Detection Setting List]
A list with the specified detection settings is shown.
A q [Add]
The [New Detection Settings] dialog box is shown and
detection settings can be added.
A a [Delete]
Delete detection settings selected from the detection
setting list.
A s [Detection Setting Number], [Detection Type]
The detection setting numbers and detection types
selected from the [Detection Setting List] are shown.
A d [Enable these detection settings] checkbox
Select this checkbox to enable the detection settings
that are selected in the detection setting list.
A f [Detection Criteria] tab, [Event] tab
Switch between the Detection Criteria and Event tabs.
• [Detection Criteria]
Specify detection settings name, detection area,
and detection criteria (P. 6-11).
• [Event]
Specify operations to be performed when events
occur (P. 6-12).
A g [Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
A h [Save settings]
Save the edited detection settings in the camera.
After the detection settings have been specified, be
sure to save the settings in the camera by clicking
[Save settings].
6
-10

Flow of Intelligent Function Setting

The intelligent functions are set according to the
procedure below. For details on the setting method, see
each setting page.
Add detection settings.
1
When you click [Add] in the [Detection Setting List],
the [New Detection Settings] dialog box is displayed.
Set the [Detection Setting Number] and [Detection
Type] of the detection setting you want to add, and
then click [OK].
Up to 15 different detection settings can be
registered.
1 [Detection Setting Number]
Specify a detection setting number from 1 to 15 for the
detection area you want to set.
2 [Detection Type]
Select detection types that suit your purpose from
[Moving Object Detection], [Abandoned Object
Detection], [Removed Object Detection], or [Camera
Tampering Detection]. For details on detection types,
see P. 6-7.
2 Enable Detection Settings.
To enable detection settings, select [Enable these
detection settings].
Clear this checkbox to disable a setting.
3 Set detection criteria ([Detection Criteria] tab P. 6-11).
Set detection criteria while operating the camera and
checking the image in the image display area.
Set operations to be performed when a change in a
4
subject is detected ([Event] tab P. 6-12).
Set e-mail notification, upload, and audio playback to
be performed upon detection.
Save the detection settings in the camera.
5
Click [Save settings] to save the settings in the
camera.
1
2