Setting The Camera Angle; Launching The Camera Angle Setting Tool; Connecting To The Camera - Canon VB-M700F Operation Manual

Setting the Camera Angle

Use the Camera Angle Setting Tool to adjust the camera angle when installing the camera or to change the capture
orientation according to the situation.
You can set zoom, focus and exposure compensation*.
VB-M700F
You can set pan, title, rotation, zoom, focus and exposure compensation.
VB-M600D VB-M600VE
* The exposure compensation (P. 7-12) set with the Camera Angle Setting Tool or Admin Viewer is reset when the camera is
rebooted. To set exposure compensation when the camera starts, set [Exposure Compensation] from [Camera] - [Initial
Camera Settings] in the Setting Menu (P. 5-9).
Important
• The Camera Angle Setting Tool is bundled for angle adjustment during camera installation only and is not intended for daily use.
Overuse may cause the camera to malfunction.
• After changing settings in the Camera Angle Setting Tool, check the settings in the Setting page and Admin Tools operate as intended.
• The Camera Angle Setting Tool cannot be used via a proxy server.
• Upload functions cannot be used while the Camera Angle Setting Tool is connected.

Launching the Camera Angle Setting Tool

Launch the Camera Angle Setting Tool by double clicking
on the [Camera Angle Setting Tool] icon located on the
desktop or by selecting [All Programs] > [WebView
Livescope] > [Camera Angle Setting Tool] from the [Start]
menu.
3
-2

Connecting to the Camera

The Camera Angle Setting Tool is not connected when the
camera starts. Connect to the camera through the
following operations.
Click [Connect] from the [File] menu.
1
The [Connection settings] dialog box will appear.
Enter each item for the camera to connect to and click
2
[OK].
[Host Name]
Enter the host name or IP address of the camera (P. 2-5).