Canon VB-M700F Operation Manual page 55

Installation Conditions
VB-M700F
[LED Setting]
Select [Turn Off] or [Turn On] for the LED operation
status on the camera. Set to [Turn Off] if you do not
want to turn on the LED.
External Input Device 1, 2 / External Output Device 1, 2
[Device Name] for external input device/external output
device
Be sure to enter each device name in order to identify
the corresponding external device being connected.
Enter [Device Name (alphanumeric characters)] using
up to 15 characters (ASCII characters (space or
printable characters) excluding the double quotation
mark (")).
Note
The external device name set here will be shown when the Admin
Viewer or bundled RM-Lite is used.
[Camera] Setting Initial Camera Settings and External Device Name
5
5
-11