How To Send Emergency Messages - Honeywell 6272CV User Manual

Security (Cont'd)

How to Send Emergency Messages

• Emergency messages are optional and may not be available on your
system. Ask your system installer if emergency messages are
available on your system.
• The Emergency screen cannot be accessed while running a screen
diagnostic test or while in the clean screen mode.
An emergency message for fire, panic, or medical can be sent to the
central monitoring station from the Emergency screen.
Emergency screen can be accessed by activating the "PANIC" Icon
located on the lower right corner of the screen.
Once the Emergency screen is accessed, perform the following to
send an emergency message.
SCREEN
32
ACTION
On the Emergency screen press and hold
(for at least 2 seconds) the associated
alarm button for the type of emergency
message you want to send (FIRE, PANIC,
or MEDICAL). You are immediately
returned to the screen from which you
pressed the "PANIC" Icon.
The