Security; Introduction To Security System Operation; How To Arm The System - Honeywell 6272CV User Manual

Security

Introduction to Security System Operation

You can arm your system in one of three arming modes: Away, Stay,
and Night. The following table lists the three different arming modes
and the results of each.
FEATURES FOR EACH ARMING MODE
Arming Exit
Mode Delay
Away Yes Yes
Stay Yes Yes
Night* Yes Yes (set for Away or
Stay Mode)
No (set for Instant or
Maximum Mode)
*Your installer may have configured Night Mode differently; have
your installer write the actual zone settings above.

How to Arm the System

Arming the system in any mode is performed in the same way, as
described below.
Note: Close all perimeter windows and doors before arming.
1. From the "Home" screen, press the SECURITY button. The "Arming" screen
is displayed.
SCREEN
14
Entry Perimeter
Delay Armed
Yes
Yes
Yes
2. On the "Arming" screen, press the
selected arming button.
Note: If Quick Arm is Not enabled in your
system, you will receive a message to
enter your User Code.
Interior
Armed
Yes
No
Yes (set for Away
or Maximum
Mode)
No (set for Stay or
Instant Mode)
ACTION