Time/Date Setup - Honeywell 6272CV User Manual

Setup (Cont'd)
Note that this is a limited mode of operation. While in this mode:
• You can use the Security button to access the Console Emulation
Mode of operation to try to clear your faults, disarm the system, or
enter additional Alpha Keypad commands specified in your panel
User Guide. You can perform almost all functions that you can
perform from a standard non-graphic alpha keypad.
• You can press the "Panic" key and generate Emergency Messages
as defined in the panel's home partition for this TouchCenter.
• The Armed and Ready LEDs on the front of the TouchCenter will
indicate the TouchCenter's home partition status. The Message (
models with Voice feature
feature) LED is not active in the Safe Mode.
• The Chime mode will function in the Safe Mode.
• When an alarm occurs in the Safe Mode, it is displayed on the
Console mode screen only and will not be shown on the Home
screen
To Exit the Safe Mode:
1. Press the ! SAFE MODE ! bar. You will be presented with the
following popup message:
2. Select "Yes" to return to the Normal Mode of operation. The
TouchCenter will reset and normal operation will return as long as
the original conditions that caused the entry into Safe Mode do not
still exist.

Time/Date Setup

You can set the time and date from the Set Time & Date screen.
•
When the time is set it will be stored in the TouchCenter and sent
to the control panel when you press the Apply button and answer
54
) or Trouble (on models without Voice
on