Check The Video Signal - Uniden UDW10055 User Manual

Check the Video Signal

As soon as the receiver powers on, it detects
the camera and shows the video on the display. The
icons at the top of the screen tell you what's going
on with the camera and receiver.
The table below shows the different status icons
and what they mean. Since the icons appear based
on the state of the camera and receiver, you won't
see all of these icons at the same time.
Icon
1 2 3
If...
the signal status icon shows no bars
or the display says No Signal
the signal status icon shows one or
two bars or the video quality is poor
there is a lot of static on the receiver
What it means
The signal from the camera is 1-low, 2-fair, 3-good, or 4-strong.
There is no signal from the camera.
The video currently on the display comes from the camera connected
4
to channel 1, 2, 3, or 4.
The video is currently zoomed in.
Signal
status
Try...
- making sure the camera is turned on.
- re-pairing the camera and receiver (see page 14).
seeing page 19 for tips on improving video quality.
seeing page 20 for tips on avoiding interference.
Channel
Charge
status
status
1
5