Connect The Indoor Camera; Check The Video Signal - Uniden UDW20553 User Manual

Connect the indoor camera

1. Connect one end of the small barrel AC adapter to the camera's
power connector and the other end to a standard 120 volt AC
outlet.
2. Press the
POWER
should turn on. If it doesn't, try reconnecting the AC adapter,
and make sure the power outlet isn't controlled by a wall switch.
If... Try...
a
Power
- reconnecting the AC adapter
light
status
- seeing if the power outlet is
doesn't
controlled by a wall switch
come on

Check the Video Signal

As soon as the receiver powers on, it
detects the camera and shows the
video on the display. The icons at the
top of the screen tell you what's
going on with the camera and
receiver.
The table below shows the different
status icons and what they mean.
Since the icons appear based on the
state of the camera and receiver, you
won't see all of these icons at the
same time.
6
button on the camera; the Power status light
Signal status
Battery
status
Link
status
Power
status
Channel status
1
Antenna
Lens
POWER
LINK
Power
connector
L IN K
Stand