Button
What it does
- In zoom mode: pan to the bottom of the zoom area.
- In the menu: move the cursor down one line.
DoWN
- In quad display: go to channel 2.
- Cycle through the active cameras.
SELECT
- From the pairing menu: link to the selected camera.
CAMERA
- Enter and exit zoom mode.
ZooM
- Turn the receiver on. Press and hold to turn it off.
PoWER
What the lights mean
Light
Power status
Battery status
What the connections do
Connector
USB output
Audio/video output
10
State
On
Off
Flashing
Green
Red
Off
Use it to
Connect the receiver to your computer for use with the Uniden Surveillance
System Software. (See the software manual for more information.)
Send the signal from the camera to a standard TV (see page 13).
What it means
The receiver is on.
The receiver is off.
The receiver is in pairing mode.
The battery is charging.
The battery is low; the receiver will turn off in 3 minutes.
The battery is fully charged.