Solving Problems - Uniden UDW10055 User Manual

If you have any trouble with your system, try these simple steps first. If you still have a question, call
our Customer Care Line listed on the front cover.
If...
The image on the
display is too bright.
The image on the
display is too dim.
The image on my
television is too bright/
dark.
The image does not fit
my TV screen.
The display is
completely blank.
The display just says
No Signal.
The display just says
USB PC Camera Mode.
The image on the
screen is frozen.
None of the buttons on
the receiver respond
when I press them.
18

Solving Problems

Try..
- Adjusting the brightness on the receiver (in the System Setup sub-menu).
- Moving the camera's sun shield over the lens.
- Adjusting the brightness on the receiver (in the System Setup sub-menu).
- Making sure the camera is at the right distance for low-light conditions.
- Adjusting the brightness on your television. (The receiver brightness
setting does not affect the television.)
- Changing the TV out setting on the receiver (in the System Setup sub-
menu).
- Making sure the AV output cable is not connected.
- Making sure the receiver is plugged in.
- Switching to a different camera. (If the receiver is in quad display mode
and the cameras are not working, the screen could be blank.)
- Resetting the receiver.
- Switching to a different channel.
- Checking the channel status icon at the top of the screen to see which
channel the receiver is on. Make sure the camera assigned to this
channel is powered on.
- Re-pair the camera to the receiver.
- Disconnecting the USB cable.
- Resetting the camera.
- Resetting the receiver.
- Resetting the receiver.