Camera Id Dip Switch Settings (Sw1) - Samsung SCP-2373 User Manual

CAMERA ID DIP SWITCH SETTINGS (SW1)

Assign a unique number for each camera to identify itself from others.
ON
SW1
1. The switch is set to "ID: 1" by default, and 7 switches other than
switch 1 are all set to OFF.
2. Each switch has a unique value, and the board ID is the sum of
the values of the switches.

Refer to the example below for the board ID.
Example 1
1+2 = 3 (Board ID = 3)
M

Use a unique ID for each Camera.

In coaxial communication systems, the camera will work normally only if the Camera ID DIP switches (SW1) are all
positioned to OFF.
ON
OFF
Example 2
4+32 = 36 (Board ID = 36)
ON
OFF
Example 3
1+2+4+8+16+32+64+128
= 255 (Board ID = 255 )
English - 21