Table of Contents
Advertisement
Divar | Installation Manual | Menu system
>>> Multiscreen modes
•
Pressing the multiscreen key on the unit cycles through all enabled
multiple view modes.
•
Enable only those views you wish to see when you use the
multiscreen key.
•
The multiscreen modes that are available depend on the number of
cameras connected and the Divar model.
>>> ATM/POS (requires bridge and license)
•
ATM/POS data is viewed on monitor A in full-screen mode only.
•
Select position, duration, text intensity and font size for display of
the ATM/POS data.
•
Press the current camera key during Live or Playback mode to
switch the ATM/POS data display on and off.
Bosch Security Systems
S
S
>
YSTEM
ETTINGS
Use the System Settings menu to get access to those items that are used to
configure the system.
MAIN MENU
SYSTEM SETTINGS
LANGUAGE
QUICK INSTALL
RECORDING SETUP
PLAYBACK SETUP
EVENT SETUP
HISTORY LOG SETUP
LOCAL PASSWORDS
CONNECTIVITY
LICENSES
INPUT AND OUTPUT CONTACTS
FACTORY DEFAULTS
•
Select the language for the menu from the list.
•
Select Quick Install to quickly set up the system. The quick install menu
is described in Chapter 2.
•
If you select Factory Defaults, all settings in the menu system are reset to
their default value.
>> RECORDING SETUP
•
The continuous mode overwrites older recordings when the disk is full.
You can set an overwrite protection period of up to 15 weeks for the latest
recordings.
•
The linear mode first gives a warning and then stops recording when the
disk is full. Older recordings must be manually deleted.
•
Set the Video-delete Mode to All video or Unprotected if you wish to
delete recorded video automatically after a certain period.
•
Set the period (None to 99 days) that recorded video is retained before it
is automatically deleted.
•
Set the Pre-event time so that recording begins before an alarm is
activated. The maximum is 30 seconds.
EN | 5-9
ENGLISH
>
>
>
>
>
>
>
>
>
Advertisement
Table of Contents
