How To Log In - Bosch DVR16E2302 Installation Manual

Divar | Installation Manual | Using the Configuration Tool

How to Log in

When you start the Configuration Tool as a stand-alone application via a
network, the Login window appears. (Click Cancel to discontinue login and exit
the application.)
When the Configuration Tool application is started for the first time, the Divar
list is empty. You must first add a Divar to the list. To add a Divar to the list or to
modify a Divar entry, click (see following paragraph).
Edit >>
To modify the Divar list
The Edit Divar list window allows you to add Divars to the list or delete Divars
from the list.
Bosch Security Systems
To automatically detect all enabled Divars on the network:
1. Click Detect.
> To detect a Divar, Discovery must be enabled on that Divar.
2. Select a Divar and click OK to add the selected Divar to the list.
To add a Divar to the list:
1. Click Add.
2. Enter the IP address or nickname of the new Divar.
> The IP address to be filled-in is set in the System settings/Connectivity/Network
setup menu of the Divar itself.
3. Type a name in the Name box or retrieve it from the Divar by checking the
Retrieve from Divar box.
4. Click Add.
To delete a Divar from the list:
1. In the list, select the Divar you wish to delete.
2. Click Delete.
> The selected Divar is removed from the list.
EN | 6-3