Table of Contents
Advertisement
DIVAR IP 7000 (2U)
3
System overview
DIVAR IP 7000 is an affordable, simple and reliable all-in-one recording, viewing and
management solution for network surveillance systems of up to 128 channels (with
32 channels pre-licensed). Running the full Bosch VMS (Video Management System) solution
and powered by Bosch VRM (Video Recording Manager) software, the DIVAR IP 7000 is an
intelligent IP storage device that eliminates the need for separate NVR (Network Video
Recorder) server and storage hardware.
The 2U rack mount unit combines advanced management and state-of-the-art recording
management into a single cost-effective, plug and play IP recording appliance for IT-minded
customers which are seeking for a state-of-the-art "second generation" NVR recording
solution.
DIVAR IP 7000 features:
–
–
–
3.1
Chassis features
The high-performance chassis includes the following features:
–
–
–
–
3.2
Chassis components
This chapter describes the most common components included with your chassis. For more
information, see the installation instructions detailed later in this manual.
3.2.1
Chassis
The chassis includes 8 hard drive bays and comes with a DVD ROM drive. The chassis
supports a 2U backplane.
Bosch Sicherheitssysteme GmbH
Instant real time access to video
View high quality HD and UHD video despite low or limited bandwidth connections.
Dynamic Transcoding technology ensures that you can view your video immediately —
anytime, anywhere.
Easy installation
DIVAR IP 7000 features wizard based set-up and centralized configuration to reduce
installation times. All components are pre-installed and pre-configured. Simply connect to
the network and turn on the unit — DIVAR IP 7000 starts recording straight out of the box.
Access to Bosch VMS
After starting the system, immediate access to the Bosch VMS management application is
offered by a customized user interface. The ability to use one central user interface for
configuration and operation management reduces installation and training requirements,
and helps to keep ongoing system management costs low.
Hard drives
The chassis features 8 slots for SATA drives. These drives are hot swappable. Once set up
correctly, these drives can be removed without powering down the unit. In addition,
these drives support SES2 (SATA).
I/O expansion slots
Each chassis model includes seven low-profile I/O expansion slots.
Peripheral drives
Each chassis supports one slim DVD-ROM drive. This drive allows you to quickly install or
save data.
Other features
Other onboard features are included to promote system health. These include various
cooling fans, a convenient power switch, a reset button, and system status LED
indicators.
Installation Manual
System overview | en
13
2016.08 | V2.1 | DOC
Advertisement
Table of Contents
