Related Manuals for socomec COUNTIS E22
Summarization of Contents
Hazards and Warnings
Electrocution, Burn, and Explosion Risks
Details risks like electrocution, burns, and explosions during installation and use.
Unit Damage Risks
Outlines precautions to prevent damage to the energy meter during operation.
User Responsibility
Defines responsibilities for assembly, connection, and use according to standards.
Preliminary Operations
Package and Unit Inspection
Verifies the condition of packaging, unit, and included items upon receipt.
Mandatory Instruction Review
Emphasizes reading and understanding instructions before commissioning for safety.
Introduction
Product Introduction
Introduces the COUNTIS E21/E22 as three-phase energy meters for direct connection up to 80A.
Core Functions
Lists key functions such as energy measurement, tariff management, and parameter display.
Front Panel Layout
Identifies and explains the components of the COUNTIS E21 and E22 front panels.
LCD Display Interpretation
Explains the meaning of various symbols and readouts displayed on the energy meter's LCD screen.
Device Dimensions
Provides the physical dimensions of the COUNTIS E21/E22 energy meter in mm.
Measured Electrical Parameters
Details the electrical parameters measured and displayed by the meter, including real-time and logged data.
Energy Balance Calculation
Defines how the energy balance is calculated using formulas for kWh and kvarh.
Installation
Installation Safety Guidelines
Provides safety recommendations and warnings related to installing the energy meter.
DIN Rail Mounting
Explains the method for mounting the COUNTIS E21/E22 on a 35-mm DIN rail.
Connection
Terminal Connections
Details the connection terminals and recommended wiring practices for the energy meter.
Connection Diagrams
Illustrates connection diagrams for three-phase networks with 4 or 3 wires, and 3 currents.
MID Compliance
MID Compliant Network Types
Specifies network types (3P+N, 3P) compliant with the MID directive.
Fitting Terminal Covers
Details the procedure for fitting terminal covers and securing them with seals for compliance.
Locking the Program Button
Instructions to lock the SET button after fitting the terminal cover for security.
MID Declaration of Conformity
Informs that the MID Declaration of Conformity is available online.
Configuration
Onscreen Configuration
Explains how to configure the device directly via its screen using button operations.
SETUP 1: Connection Type Selection
Guides through selecting the connection type (3.4.3, 3.3.3, 3.3.2) within the SETUP 1 menu.
SETUP 2: Menu Navigation
Describes how to navigate and access functions within the SETUP 2 menu, including resetting energy.
SETUP 2: Resetting Energies
Details the "Reset energies" function within the SETUP 2 menu, specifying types of energy to reset.
Use
Navigating Menus and Readings
Explains how to switch between menus and view readings using buttons.
Measurement Menu Summary
Provides a table summarizing menus and corresponding electrical measurements and information.
Tariff 1 Energy Data (Tar.1)
Shows displays for imported/exported active, inductive, capacitive, and reactive energy for tariff 1.
Tariff 2 Energy Data (Tar.2)
Shows displays for imported/exported active, inductive, capacitive, and reactive energy for tariff 2.
Total Energy Data (tot)
Displays total imported/exported active, reactive, and apparent energy across all phases.
Partial Readings & Energy Balance (Par.b)
Shows partial imported/exported active, reactive, and apparent energy, plus energy balances.
Partial Energy Meter Management
Explains how to start, stop, and reset the partial energy meter readings.
Realtime Readings (rt)
Displays realtime values for active, apparent, reactive power, voltage, current, and power factor.
Information Menu (info)
Shows firmware versions, checksums, and connection type information.
Diagnostics Messages
Missing Phase Detection
Describes the message and symbol for missing phases and how to identify them.
Reversed Phase Indication
Explains symbols indicating reversed phase sequences (123 or 132).
Malfunction Indicator
Details the malfunction message and the need to replace the meter.
Assistance
Assistance: Common Issues & Solutions
Lists common causes for meter issues and their corresponding solutions.
Characteristics
General Features & Compliance
Lists general features including compliance, frequency, power supply, and connectivity.
Current Measurement Specs
Details current measurement specifications like type, input consumption, and overload capacity.
Voltage Measurement Specs
Provides specifications for voltage measurements, including range and consumption.
Frequency Measurement Specs
Specifies the frequency measurement range and accuracy.
Energy Measurement Capabilities
Lists energy measurement capabilities, including active, reactive, and MID metering.
Energy Measurement Accuracy
Details accuracy classes for active and reactive energy measurements.
Display Specifications
Describes the LCD display type, refresh time, and ranges for various energy and power readings.
Environmental & Housing Details
Lists environmental operating conditions and housing specifications like mounting and protection.
Glossary of Abbreviations
Glossary of Abbreviations
Provides a list of abbreviations used in the manual and their meanings.
Need help?
Do you have a question about the COUNTIS E22 and is the answer not in the manual?
Questions and answers