Reference manual
Physical left margin (Physlm)
Physlm
Back
Next
1
2
3
4
Physlm=
0/10" *
Set
<
>
Exit
1
2
3
4
PRINT
BACK
Select the Physlm menu (2).
Online
Setup
Setting otpions: 0 to 30 in 1/10 inch steps
Default setting: 0 1/10 inch
Online
Permanent (physical) setting of the left margin. This parameter cannot
Setup
be changed by emulation-dependent margin settings. Margin setting
values entered by ESC sequences are added to the Physlm.
Note that this value is subtracted from the maximum printing width
of 8 or 13.6 inches.
Confirm your settings by pressing the Set key (1).
All parameters described in the Paphand group may also be de-
fined via an ESC sequence (see chapter
Programmer's Application Manual
Mechanical adjustments to the printer
Emulations
or the
).
?
QUIT
86